3CONTAINER MOUNTING (See Fig. 3)
1.Install one container to left side first. Install another container to center position and one in right position.
NOTE: Left edge of right container should always overlap right edge of left container at center supports.
2.Close cover and lock latches over center support tubes. To lock and release latches, pull back on latch handles.
COVER LATCH
HANDLES
03022
CONTAINER | CENTER | |
SUPPORT | ||
HANDLES | ||
TUBES | ||
|
FIG. 3
4LOWER CHUTE (See Fig. 4)
1.Raise and hold deflector shield in upright position.
2.Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown.
3.Hook rear latch into flange hole on back of mower.
4.Hook front latch into hole in front gauge wheel bracket or under gauge wheel bracket on mower without a hole in the bracket.
CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
DEFLECTOR
SHIELD
| MOUNTING |
02783 | TAB |
|
REAR LATCH
GAUGE WHEEL
BRACKET
FRONT
LATCH
FIG. 4
6