ASSEMBLY
1 | BAGGER SUPPORT ASSEMBLY | 2. | Align support assembly pin with hole in drawbar and |
| hang assembly over the shoulder bolts. | ||
|
| ||
| 3. | Be sure support assembly is seated properly and secure | |
Determine which type drawbar you have on your tractor. |
| with retainer spring supplied. | |
Compare the drawbar illustrations below to the drawbar |
| SHOULDER | |
located at the rear of your tractor. |
| BOLTS | |
Follow the support assembly instructions that apply to your |
|
| |
type drawbar. |
|
| |
|
| SUPPORT |
|
|
| ASSEMBLY |
|
DRAWBAR A | DRAWBAR B |
| 02530 |
(Vertical Drawbar) | (Sloping Drawbar) |
| |
|
| ||
DRAWBAR A (See Figs. 1A, 1B & 1C) | RETAINER |
| |
1. Remove and discard the upper bolt on both sides of | SPRING | FIG. 1C | |
the drawbar. Using the same holes, install the shoulder |
| ||
bolts supplied and tighten securely. | DRAWBAR B (See Fig. 1D) | ||
|
| ||
| REMOVE AND DISCARD | 1. Slide flanges of support assembly into drawbar slots first, | |
| UPPER BOLTS AND INSTALL | then, pivot backwards inserting pin into drawbar pin hole. | |
| SHOULDER BOLTS SUPPLIED | 2. Be sure support assembly is seated properly, then secure | |
|
| with retainer spring. |
|
|
|
| SUPPORT |
|
|
| ASSEMBLY |
DRAWBAR SLOTS
|
| 2 | 5 | 31 |
| 0 |
| ||
|
|
| ||
|
|
| DRAWBAR | |
FIG. 1A |
|
|
| |
|
|
|
|
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
PIN
02543
FIG. 1B
DRAWBAR
PIN HOLERETAINER SPRING
FIG. 1D
5
