OPERATION

By moving the levers an equal amount forward

for more than 5 seconds at a time. If the engine

or back the machine will move in a straight line

will not start, wait about 10 seconds before

in that direction. FIG - 9

trying again. FIG - 11

Movement of either lever forward will cause the

 

 

right or left wheel to rotate in a forward direction.

 

To stop movement pull both levers into the

 

neutral position.

 

To turn right while moving in a forward direction

 

pull the right lever back towards the neutral

 

position, this will slow the rotation of the right

 

wheel and cause the machine to turn in that

Motion Control Lever Pattern

direction.

(Right Side)

To turn left while moving in a forward direction

FIG - 9

 

pull the left lever back towards the neutral

The hour meter displays the total operating time

position, this will slow the rotation of the left

and reminds of service intervals.

wheel and cause the machine to turn in that

The meter will indicate “CHG OIL” for engine oil

direction.

and “SVC” for general service at preset inter-

 

To zero turn pull one lever back beyond neutral

vals.

The hour meter will reset itself at predetermined

while holding the other slightly ahead of neutral.

times.

NOTE: The direction of the zero turn will be

Engine “CHG” will come on after the first ten

determined by which lever is pulled back beyond

(10) hours of operation, and will stay on for one

neutral. Thus left lever back, left zero turn and

(1) hour of operation before it will reset itself. It

opposite for right zero turn. Use extra care

will come on every 99 hours thereafter, and stay

when using this maneuver the machine can

on for five (5) hours of operation before reset-

spin very rapidly if one lever is positioned

ting.

to far ahead of the other.

Mower “SVC” message will come on every 50

 

Blade engagement switch located on the con-

hours to remind to lubricate the unit, check

blades and fasteners, etc. This message will

sole is engaged by pulling up on the switch and

stay on for two (2) hours of operation before

pushed down to disengage. FIG - 10

resetting.

 

Choke control is located on the console. To choke engine pull knob push to release. FIG - 10

Throttle control is located on the console. Used to control engine RPM. FIG - 10. Some models have an intergated choke located on the throttle control. Choke position for these models is maximum forward on the throttle control.

Parking brake is located on the left side of the machine and directly in front of the fuel tank. Pull the lever back to engage the brake and push lever forward to release the brake.

Key switch is located on the console. Used to start the machine. NOTE: Do not run the starter

NOTE: Associated choke on some models.

Choke Throttle

Key Switch

Blade

Engagement

Hour Meter

FIG - 10

18

Page 17 Page 19
Page 18
Image 18
Husqvarna iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, iZ6123KAA manual To far ahead of the other
Page 17 Page 19

iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817 SKAA, iZ4817KAA, iZ6123KAA, iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, iZ6123KAA specifications

Husqvarna has long been synonymous with quality outdoor equipment, particularly in the realm of zero-turn mowers. Among their extensive lineup, models like the iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, and iZ6123KAA stand out for their superior performance and innovative features.

Starting with the iZ4821KAA, this model is equipped with a robust 21 horsepower engine, ensuring reliable power for tackling even the most challenging mowing tasks. Its 48-inch cutting deck allows for efficient navigation around obstacles, while the zero-turn capability enables sharp turns for precise trimming.

Next, the iZ5223KAA boasts a larger 23-horsepower engine and a 52-inch cutting deck, making it suitable for larger properties. The commercial-grade construction provides durability and longevity, while features such as electric blade engagement and a high-back seat enhance user comfort during lengthy mowing sessions.

The iZ5223KOA combines performance and advanced features, including a hydraulic system for improved maneuverability. Its adjustable cutting height provides versatility in maintaining lawns of varying grass lengths.

For those looking for a compact mower, the iZ4217SKAA offers a 17-horsepower engine with a 42-inch deck, perfect for small to medium-sized yards. Its lightweight design and agile handling make it an excellent choice for homeowners seeking efficiency without sacrificing performance.

The iZ4817SKAA and iZ4817KAA both feature a 17-horsepower engine, delivering robust power with a 48-inch cutting deck. These models are designed with user-friendly controls and a comfortable seating position, making them easy to operate for anyone.

Finally, the iZ6123KAA represents the pinnacle of Husqvarna's engineering, featuring a 23-horsepower engine and a 61-inch deck, ideal for commercial use or larger properties. Its innovative technology includes a dual hydrostatic transmission for smooth power delivery and enhanced maneuverability, while built-in safety features ensure a secure mowing experience.

Collectively, these models integrate technologies such as high-capacity air filtration systems, optimized engine cooling, and a user-friendly dashboard with intuitive controls. Each model promises efficiency, comfort, and durability, solidifying Husqvarna's reputation as a leader in power equipment. Whether for residential use or commercial applications, these zero-turn mowers cater to a variety of needs, ensuring a well-maintained lawn with ease and precision.
Top Page Image Contents