MAINTENANCE

Fuel shut off valve is located at the right rear of the seat. The valve has three positions a right tank, left tank and center is the off position. FIG - 11.

Pump release valves located at the right front corner of the pumps. Used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve. NOTE: Only rotate valve 1/4 turn to release system.

Maintenance

Fuel Valve

FIG - 11

WARNING: No settings, adjustments or

maintenance is to be made unless: Engine is stopped, key has been removed, park brake is on and battery cable removed from battery.

Annual inspection and maintenance from an authorized Husqvarna dealer is recommended to keep your machine in the best condition mechanically and ensures safe operation.

Engine oil

Should be checked daily before starting the machine. See the engine manufacturers manual for specifications on type of oil, filling instruc- tions and service intervals. FIG - 12

Mower blades

Inspect blades and sharpen or replace as needed. Check blades daily or as needed. Bent, cracked or blades with large notches in them should be replaced. Sharpen to an angle of 22 to 28 degrees. Always check the balance of the blades after sharpening to prevent excessive vibration.

“F” Full

Operating Mark

Range

FIG - 12

Safety interlock system

Check daily and never operate the machine if the system is not functioning properly. The starter should crank only when the operator is in the seat, the parking brake is applied, blade switch off and the motion control levers in the neutral slots. If the machine starts with any of these controls in an operating position, turn the machine off an repair the system immediately.

Cutter Housings

Grease housings once weekly or every 40 to 50 hours of use. Use a good synthetic grease. Pump grease in until a small amount purges from the popet on the underside of the deck. Check the torque of the pulley bolt (45 ft/lbs) should be maintained.

19

Page 18 Page 20
Page 19
Image 19
Husqvarna iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817 SKAA, iZ4817KAA, iZ6123KAA manual Maintenance, Engine oil
Page 18 Page 20

iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817 SKAA, iZ4817KAA, iZ6123KAA, iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, iZ6123KAA specifications

Husqvarna has long been synonymous with quality outdoor equipment, particularly in the realm of zero-turn mowers. Among their extensive lineup, models like the iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, and iZ6123KAA stand out for their superior performance and innovative features.

Starting with the iZ4821KAA, this model is equipped with a robust 21 horsepower engine, ensuring reliable power for tackling even the most challenging mowing tasks. Its 48-inch cutting deck allows for efficient navigation around obstacles, while the zero-turn capability enables sharp turns for precise trimming.

Next, the iZ5223KAA boasts a larger 23-horsepower engine and a 52-inch cutting deck, making it suitable for larger properties. The commercial-grade construction provides durability and longevity, while features such as electric blade engagement and a high-back seat enhance user comfort during lengthy mowing sessions.

The iZ5223KOA combines performance and advanced features, including a hydraulic system for improved maneuverability. Its adjustable cutting height provides versatility in maintaining lawns of varying grass lengths.

For those looking for a compact mower, the iZ4217SKAA offers a 17-horsepower engine with a 42-inch deck, perfect for small to medium-sized yards. Its lightweight design and agile handling make it an excellent choice for homeowners seeking efficiency without sacrificing performance.

The iZ4817SKAA and iZ4817KAA both feature a 17-horsepower engine, delivering robust power with a 48-inch cutting deck. These models are designed with user-friendly controls and a comfortable seating position, making them easy to operate for anyone.

Finally, the iZ6123KAA represents the pinnacle of Husqvarna's engineering, featuring a 23-horsepower engine and a 61-inch deck, ideal for commercial use or larger properties. Its innovative technology includes a dual hydrostatic transmission for smooth power delivery and enhanced maneuverability, while built-in safety features ensure a secure mowing experience.

Collectively, these models integrate technologies such as high-capacity air filtration systems, optimized engine cooling, and a user-friendly dashboard with intuitive controls. Each model promises efficiency, comfort, and durability, solidifying Husqvarna's reputation as a leader in power equipment. Whether for residential use or commercial applications, these zero-turn mowers cater to a variety of needs, ensuring a well-maintained lawn with ease and precision.
Top Page Image Contents