ENCONTENTS
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
Read through the Operator‘s Manual carefully and understand the content before using the machine.
These instructions supplement the instructions that were included with the machine. For other procedures, please refer to the operating instructions for the machine.
The J-handle set contains the following parts:
Loop handle:
1 Loop handle
1 Spacer loop handle
1 Washer
1 Screw M6x40
J-handle:
1
3 Screws M5x16
1 Harness
1 Suspension ring
1Grass blade
1Support cup
1Support flange
1Nut
1Box spanner
1Transport guard
NOTE! The trimmer guard must be replaced with the accompanying combination guard if a grass blade is fitted to the machine.
!WARNING!
Saw blades must not be fitted on a machine equipped with a
List of contents |
|
CONTENTS |
|
Components in the | 2 |
List of contents | 2 |
SAFETY INSTRUCTIONS |
|
Cutting equipment | 3 |
Basic clearing techniques | 4 |
ASSEMBLY |
|
Assembling the | 5 |
Fitting the suspension ring | 5 |
Assembly of the blade and trimmer head | 5 |
Fitting the combination guard, grass blade and grass knife ... | 5 |
START AND STOP |
|
Control before starting | 6 |
TECHNICAL DATA |
|
6 |
2 – English