PRESENTATION
Dear Customer,
Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product and that it will be your companion for a long time. A purchase of one of our products gives you access to professional help with repairs and services. If the retailer who sells your machine is not one of our authorised dealers, ask him for the address of your nearest service workshop.
This operator’s manual is a valuable document. Make sure it is always at hand at the work place. By following its content (using, service, maintenance etc) the life span and the
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition that dates back to 1689, when the Swedish King Charles XI ordered the construction of a factory for production of muskets. At that time, the foundation was already laid for the engineering skills behind the development of some of the world's leading products in areas such as hunting weapons, bicycles, motorcycles, domestic appliances, sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products for forestry, park maintenance and lawn and garden care, as well as cutting equipment and diamond tools for the construction and stone industries.
Owner responsibility
It is the owner’s/employer’s responsibility that the operator has sufficient knowledge about how to use the machine safely. Supervisors and operators must have read and understood the Operator’s Manual. They must be aware of:
•The machine’s safety instructions.
•The machine’s range of applications and limitations.
•How the machine is to be used and maintained.
National legislation could regulate the use of this machine. Find out what legislation is applicable in the place where you work before you start using the machine.
The manufacturer’s reservation
Subsequent to publishing this manual Husqvarna may issue additional information for safe operation of this product. It is the owner’s duty to keep up with the safest methods of operation.
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
For customer information and assistance, contact us at our website: www.husqvarnacp.com
4 – English
Design and features
This is a high speed, hand held, power cutter designed to cut hard materials like masonry or steel and should not be used for any purpose not described in this manual. Safe operation of this product requires the operator to read this manual carefully. Ask your dealer or Husqvarna should you need more information.
Some of the unique features of your product are described below.
Active Air Filtration™
Centrifugal air cleaning for longer service life and longer service intervals.
OilGuard (K760 OilGuard)
An optical detection system to detect if there is oil in the fuel or if the oil type is wrong.
SmartCarb™
Dura Starter™
Dust sealed starter unit, where the return spring and the pulley bearing are sealed which makes the starter virtually maintenance free and even more reliable.
X-Torq®
The
EasyStart
The engine and starter are designed to ensure quick and easy starting of the machine. Reduces the pull resistance in the starter cord by up to 40%. (Reduces the compression during starting.)
Air purge
When you push the air purge diaphragm, fuel is pumped through to the carburettor. Fewer pulls are required for starting, meaning the machine becomes easier to start.
DEX
Low flushing wet cutting kit for effective dust handling.
Efficient vibration damping system
Efficient vibration dampers spare arms and hands.
Reversible cutting head
The machine is fitted with a reversible cutting head allowing cutting close to a wall or at ground level, restricted only by the thickness of the blade guard.
Specially designed starter handle (K760 Rescue)
Specially designed starter handle, with room for heavy gloves.
Adjustable carry strap (K760 Rescue)
Adjustable carry strap for full freedom of movement.
