SYMBOLS
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand com- pletely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Homelite customer service for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
| FEATURES |
|
|
PRODUCT SPECIFICATIONS |
|
Engine Size | 26cc |
Engine Output | 0.8 HP |
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
The engine switch controls the ignition system. The switch must be in the on ( I ) position for the engine to start and run. To stop, place the switch in the off ( O ) position.
The recoil starter is used for starting the engine.
The primer bulb pumps fuel from the fuel tank to the carburetor. This is necessary only when starting a cold engine or after refueling an engine that has run out of fuel.
The start lever opens and closes the choke valve in the carburetor. The START position enriches the fuel mixture for starting a cold engine. The RUN position provides the correct fuel mixture for normal operation after starting, or for restarting a warm engine.
The throttle lever controls the rotation speed of the tines. Completely engage the throttle lever while cultivating.
6 - English