Husqvarna K 3600 MKII manual Technical Data, Extending the hydraulic hoses

	TECHNICAL DATA
Technical data	K3600 MKII
Blade diameter, mm/inches	350/14”
Cutting depth, mm/inches	260/10”
Max. peripheral speed, m/s / r/min	55/3000
Max.motor speed, r/min	17000
Hydraulic motor	Geared motor (open centre valve)
Max. hydraulic pressure, bar/ (psi)	150 / 2200
Oil flow, min-max, l/min	35-42
Height, mm/inches	410
Length, mm/inches	715
Width, mm/inches	260
Weight, excl. blade, kg	8,3
Weight ring blade, kg	0,8
Specifications hydraulic oil*	150 VG 32 (10W)**
Oil temperature (operational), °C	60
Water consumption, l/min	4
Hydraulic couplings	1/2' FF according to HTMA regulations. (thread 3/8')

*We recommend the use of environmentally approved hydraulic oil.

**With high ambient temperatures use oil with a higher viscosity.

Noise emissions (see note 1)
Sound power level, measured dB(A)	110
Sound power level, guaranteed LWA dB(A)	111
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)	99
Vibration levels (see note 3)
Front handle, m/s2	4,3
Rear handle, m/s2	6,0

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Noise pressure level according to EN 792-7/A1. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.0 dB(A).

Note 3: Vibration level according to EN 792-7/A1. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 1 m/s2.

Extending the hydraulic hoses

When extending the hydraulic hoses, the inside diameter of the hose must be increased according to the table to counteract power loss.

Extension, m	Inside diameter of the hydraulic hose, inches
Up to 30 m	1/2
30-45	5/8
45-100	3/4

20 – English