SERVICE AND ADJUSTMENTS

TO REPLACE MOTION DRIVE BELT (See Fig. 41)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Disconnect clutch wire harness (A).

3.Remove anti-rotation link (B) on right side of tractor.

4.Removebeltfromstationaryidler(C)andclutchingidler(D).

5.Remove belt from centerspan idler (E).

6.Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

7.Remove belt downward from engine pulley and around electric clutch (G).

8- Slide belt toward rear of tractor, off the steering plate

(H)and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J).

2.Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley (G).

3.Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pul- ley (F). Be sure belt is inside the belt keeper.

4.Install belt on centerspan idler (E).

5.Install belt through stationary idler (C) and clutching idler (D).

6.Reinstall anti-rotation link (B) on right side of tractor.

Tighten securely.

7. Reconnect clutch harness (A).

8- Make sure belt is in all pulley grooves and inside all belt guides and keepers.

9.Install mower (See “TO INSTALL MOWER” section in this manual).

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 42)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

Start engine and move motion control lever until tractor does not move forward or backward.

Hold motion control lever in that position and turn engine off.

While holding motion control lever in place, loosen the adjustment bolt.

Movemotioncontrollevertotheneutral(lockgate)position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

B A

G

H

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

• Loosen the adjustment bolt.

Move the motion control lever 1/4" to 1/2" in the direc-

 

tion it is trying to creep.

Tighten adjustment bolt securely.

 

C

D

J

 

E

F

02953 electric

Fig. 41

Start engine and test.

If tractor still creeps, repeat above steps until satisfied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK

 

GATE

 

ADJUSTMENT

 

BOLT

Fig. 42

23

Page 23
Image 23
Husqvarna LGTH2454 owner manual To Replace Motion Drive Belt See Fig, To Check Brake, Belt Removal, Belt Installation

LGTH2454 specifications

The Husqvarna LGTH2454 is a versatile and powerful lawn tractor designed to provide excellent cutting performance and user comfort. With its robust construction and advanced features, it is ideal for homeowners with medium to large-sized yards. The LGTH2454 stands out for its powerful engine, user-friendly operation, and enhanced mowing capabilities, making it a reliable choice for lawn care enthusiasts.

At the heart of the LGTH2454 is its 24 HP Kohler engine, known for its durability and efficient performance. This powerful engine delivers consistent power to the cutting deck, ensuring a clean and even cut every time. The automatic transmission allows for smooth speed adjustments, providing an effortless driving experience whether you’re mowing on flat terrain or tackling slight inclines.

One of the standout features of the LGTH2454 is its 54-inch cutting deck. The wide cutting path not only helps to reduce mowing time but also allows for efficient coverage of large areas. The cutting height can be easily adjusted from 1.5 to 4 inches, providing flexibility for different grass types and mowing conditions. The reinforced cutting deck design ensures durability, while the air-induction technology enhances airflow within the deck for superior grass lift and cutting performance.

Comfort is a key focus in the design of the LGTH2454. The high-back seat is ergonomically designed to provide support during extended mowing sessions. Coupled with an adjustable steering wheel, it allows operators to customize their seating position for optimal comfort. The easy access controls streamline operation, ensuring that users can focus on mowing without fumbling with complicated settings.

The LGTH2454 also features an innovative cutting system that enables mulching, bagging, or side discharge, making it adaptable to various lawn care needs. The mulching kit recycles clippings back into the lawn, promoting healthier grass growth, while the bagging option collects grass for easy disposal.

Additional technologies such as the LED headlights enhance visibility during early morning or late afternoon mowing, enabling users to work in various lighting conditions. The rugged tires provide excellent traction, ensuring stability on uneven ground.

In conclusion, the Husqvarna LGTH2454 is a top-tier lawn tractor that combines power, versatility, and comfort. Its robust engine, wide cutting deck, and user-centric design make it an appealing choice for anyone looking to maintain a beautiful lawn with ease and efficiency. Whether you’re a seasoned gardener or a novice homeowner, the LGTH2454 is equipped to meet your lawn care needs.