SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.

Ensure transaxle is in the neutral position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Ensure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 35)

Place attachment clutch in “DISENGAGED” position.

Lower attachment lift lever to its lowest position.

Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly.

Remove mower belt from electric clutch pulley (M).

Disconnect front link (E) from mower - remove retainer spring and washer.

Gotoeithersideofmoweranddisconnectmowersuspen- sion arm (A) from chassis and rear lift link (C) from rear mowerbracket(D)-removeretainerspringsandwashers.

Go to other side of mower and disconnect the suspen- sion arm and rear lift link.

CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket.

Turn tractor steering wheel to the left as far as it will go.

Slide mower out from under right side of tractor.

TO INSTALL MOWER

Follow procedure described in “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual.

 

L

 

 

B

 

 

 

 

 

M

F

 

 

 

 

 

 

 

 

 

 

E

K

 

 

 

A

 

 

 

 

 

H

 

 

 

 

 

C

D

S

 

 

 

 

C

D

 

 

 

 

 

 

Fig. 35

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 36)

MOWER DRIVE BELT REMOVAL

Park tractor on a level surface. Engage parking brake.

Lower attachment lift lever to its lowest position.

Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

Remove screws (P) from mandrel covers (Q) and remove covers.

Removeanydirtorgrassclippingswhichmayhaveaccu- mulated around mandrels and entire upper deck surface.

Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (V).

MOWER DRIVE BELT INSTALLATION

Install belt around all mandrel pulleys (R) and around idler pulleys (V) as shown.

Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

Reassemble mandrel covers (Q). Securely tighten all screws.

Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

Raise attachment lift lever to highest position.

P

P

 

 

 

L

M

P

 

Q

 

K

R

Q

R

V

 

 

R

 

21

Fig. 36

 

Page 21
Image 21
Husqvarna LGTH2454 owner manual Service and Adjustments, To Remove Mower See Fig, To Install Mower

LGTH2454 specifications

The Husqvarna LGTH2454 is a versatile and powerful lawn tractor designed to provide excellent cutting performance and user comfort. With its robust construction and advanced features, it is ideal for homeowners with medium to large-sized yards. The LGTH2454 stands out for its powerful engine, user-friendly operation, and enhanced mowing capabilities, making it a reliable choice for lawn care enthusiasts.

At the heart of the LGTH2454 is its 24 HP Kohler engine, known for its durability and efficient performance. This powerful engine delivers consistent power to the cutting deck, ensuring a clean and even cut every time. The automatic transmission allows for smooth speed adjustments, providing an effortless driving experience whether you’re mowing on flat terrain or tackling slight inclines.

One of the standout features of the LGTH2454 is its 54-inch cutting deck. The wide cutting path not only helps to reduce mowing time but also allows for efficient coverage of large areas. The cutting height can be easily adjusted from 1.5 to 4 inches, providing flexibility for different grass types and mowing conditions. The reinforced cutting deck design ensures durability, while the air-induction technology enhances airflow within the deck for superior grass lift and cutting performance.

Comfort is a key focus in the design of the LGTH2454. The high-back seat is ergonomically designed to provide support during extended mowing sessions. Coupled with an adjustable steering wheel, it allows operators to customize their seating position for optimal comfort. The easy access controls streamline operation, ensuring that users can focus on mowing without fumbling with complicated settings.

The LGTH2454 also features an innovative cutting system that enables mulching, bagging, or side discharge, making it adaptable to various lawn care needs. The mulching kit recycles clippings back into the lawn, promoting healthier grass growth, while the bagging option collects grass for easy disposal.

Additional technologies such as the LED headlights enhance visibility during early morning or late afternoon mowing, enabling users to work in various lighting conditions. The rugged tires provide excellent traction, ensuring stability on uneven ground.

In conclusion, the Husqvarna LGTH2454 is a top-tier lawn tractor that combines power, versatility, and comfort. Its robust engine, wide cutting deck, and user-centric design make it an appealing choice for anyone looking to maintain a beautiful lawn with ease and efficiency. Whether you’re a seasoned gardener or a novice homeowner, the LGTH2454 is equipped to meet your lawn care needs.