MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 10)

Raise mower to highest position to allow access to blades.

Remove blade bolt, lock washer and flat washer se- curing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble blade bolt, lock washer and flat washer in exact order as shown.

Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

MANDREL

TRAILINGASSEMBLY EDGE UP

CENTER

HOLE

LOCK WASHER

STAR

BLADE

FLAT WASHER

BLADE BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE

IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 10

TO SHARPEN BLADE (See Fig. 11)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 11

15

Page 15
Image 15
Husqvarna LT1538 owner manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care

LT1538 specifications

The Husqvarna LT1538 is a robust garden tractor designed for homeowners who seek efficiency and comfort while maintaining their lawns. Equipped with a powerful 15 HP engine, the LT1538 delivers reliable performance, ensuring that mowing and other tasks are handled with ease. This garden tractor stands out due to its impressive combination of features, technologies, and user-friendly characteristics.

One of the key features of the LT1538 is its 38-inch cutting deck, which allows for precise and efficient mowing of medium-sized lawns. The deck comes with a spring-assisted lifting mechanism, making it easy to adjust cutting heights from 1 to 4 inches. This flexibility ensures that users can achieve the desired grass length easily, adapting to different lawn conditions and personal preferences.

The Husqvarna LT1538 also integrates an innovative air induction technology that enhances grass lift, resulting in an even cut every time. This technology promotes better airflow, allowing the mower to handle damp grass more effectively. Coupled with the sharp, durable blades, it ensures that your lawn is left looking pristine after each mowing session.

Another significant aspect of the LT1538 is its user-friendly controls and ergonomic design. The comfortable seat with adjustable options provides ample support for extended mowing sessions. The intuitive dashboard houses essential controls, including an easy-to-read fuel gauge and cutting height adjustment, making operation straightforward for users of all experience levels.

For ease of operation, the LT1538 features an automatic transmission, allowing users to navigate various terrains without constant gear shifting. This system enables smooth acceleration and deceleration, taking the stress out of mowing and making it an enjoyable experience.

Furthermore, the Husqvarna LT1538 is designed with durability in mind. Its rugged frame and durable components ensure longevity even when faced with regular use. The mower also includes a washout port for effortless deck cleaning, helping to maintain performance and prolong the life of the blades.

In summary, the Husqvarna LT1538 garden tractor combines power, efficiency, and ease of use, making it a standout choice for homeowners. With its reliable engine, advanced cutting technology, ergonomic design, and robust construction, the LT1538 is well-equipped to handle a variety of mowing tasks, ensuring that your lawn remains well-groomed with minimal effort.