ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

7/16" wrenches

Pliers

(1)

3/4" wrench

Tire pressure gauge

Utility knife

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

Remove all accessible loose parts and parts cartons from carton.

Cut, from top to bottom, along lines on all four corners of carton, and lay panels flat.

Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

Slide extension shaft onto lower steering shaft. Align mounting holes in extension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: TIGHTEN BOLT AND NUT SECURELY TO 10-12 FT. LBS TORQUE.

Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

Position front wheels of the tractor so they are pointing straight forward.

Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

Assemble large flat washer, 1/2 hex nut and tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

 

INSERT

 

1/2 HEX NUT

 

LARGE FLAT

 

WASHER

 

STEERING

STEERING

BOOT

WHEEL

 

 

TABS

ADAPTER

 

 

EXTENSION SHAFT

 

1/4 HEX BOLT

1/4 LOCKNUT

 

LOWER

TAB

SLOTS

STEERING

 

SHAFT

 

FIG. 1

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

6• Raise seat and tighten adjustment bolt securely.

Page 6
Image 6
Husqvarna LT1538 Tools Required for Assembly, To Remove Tractor from Carton, Before Removing Tractor from Skid

LT1538 specifications

The Husqvarna LT1538 is a robust garden tractor designed for homeowners who seek efficiency and comfort while maintaining their lawns. Equipped with a powerful 15 HP engine, the LT1538 delivers reliable performance, ensuring that mowing and other tasks are handled with ease. This garden tractor stands out due to its impressive combination of features, technologies, and user-friendly characteristics.

One of the key features of the LT1538 is its 38-inch cutting deck, which allows for precise and efficient mowing of medium-sized lawns. The deck comes with a spring-assisted lifting mechanism, making it easy to adjust cutting heights from 1 to 4 inches. This flexibility ensures that users can achieve the desired grass length easily, adapting to different lawn conditions and personal preferences.

The Husqvarna LT1538 also integrates an innovative air induction technology that enhances grass lift, resulting in an even cut every time. This technology promotes better airflow, allowing the mower to handle damp grass more effectively. Coupled with the sharp, durable blades, it ensures that your lawn is left looking pristine after each mowing session.

Another significant aspect of the LT1538 is its user-friendly controls and ergonomic design. The comfortable seat with adjustable options provides ample support for extended mowing sessions. The intuitive dashboard houses essential controls, including an easy-to-read fuel gauge and cutting height adjustment, making operation straightforward for users of all experience levels.

For ease of operation, the LT1538 features an automatic transmission, allowing users to navigate various terrains without constant gear shifting. This system enables smooth acceleration and deceleration, taking the stress out of mowing and making it an enjoyable experience.

Furthermore, the Husqvarna LT1538 is designed with durability in mind. Its rugged frame and durable components ensure longevity even when faced with regular use. The mower also includes a washout port for effortless deck cleaning, helping to maintain performance and prolong the life of the blades.

In summary, the Husqvarna LT1538 garden tractor combines power, efficiency, and ease of use, making it a standout choice for homeowners. With its reliable engine, advanced cutting technology, ergonomic design, and robust construction, the LT1538 is well-equipped to handle a variety of mowing tasks, ensuring that your lawn remains well-groomed with minimal effort.