ASSEMBLY

(1) Washer

(1) Hex Bolt

(1) Seat

Slope Sheet

(1) Oil Drain Tube

Key

(2) Keys

 

 

(1) Hex Bolt

 

 

Steering

 

 

Insert

Extension

 

 

Shaft

 

 

Steering

Lock Washer

 

 

 

 

Steering

Boot

 

 

Wheel

 

 

(1) Hood Scoop

 

 

 

Washer

 

Steering Wheel

 

Adapter

 

 

 

 

Your new tractor has been assembled at the factory with

When right or left hand is mentioned in this manual, it means

the exception of those parts left unassembled for

 

when you are in the operating position (seated behind the

shipping purposes.

 

 

steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat.

Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

Remove locknut and large flat washer from steering shaft.

Position front wheels of the tractor so they are pointing straight forward.

Slide the steering sleeve over the steering shaft.

Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO 5 ROLL OFF SKID.

STEERING

WHEEL

STEERING

BOOT

STEERING

SHAFT

STEERING WHEEL

INSERT

BOLT

LOCKWASHER

LARGE FLAT WASHER

STEERING

WHEEL

ADAPTOR

 

6

FIG. 1

0312

 

Page 5
Image 5
Husqvarna LTH1538 owner manual Assembly, To Remove Tractor from Carton, Before Removing Tractor from Skid, Unpack Carton