OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheelleverwhiletheengineisrunning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have devel- oped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

1.Place tractor safely on a level surface - that is clear and open - with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in disengaged position (See “TO TRANSPORT” in this section of manual).

3.Sitting in the tractor seat, start engine. After the en- gine is running, move throttle control to slow position. Disengage parking brake

CAUTION: At any time, during step 4, there may be movement of the drive wheels.

4.Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five

(5) seconds and release pedal. Repeat this procedure three (3) times.

5.Shut- off engine and set parking brake.

6.Engage transmission by placing freewheel control in engaged position (See “TO TRANSPORT” in this sec- tion of manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

8.Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Tire chains cannot be used when the mower housing is attached to tractor.

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the tractor. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 16).

Fig. 16

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

15

Page 14 Page 16
Page 15
Image 15
Husqvarna LTH1742T manual Mowing Tips, Purge Transmission
Page 14 Page 16

LTH1742T specifications

The Husqvarna LTH1742T is a robust lawn tractor designed for homeowners who seek a reliable, efficient, and easy-to-use machine for maintaining their lawns. This model combines power, comfort, and innovative features that enable users to tackle various yard tasks with efficiency and ease.

One of the standout features of the LTH1742T is its powerful engine. Equipped with a 17-horsepower Briggs & Stratton single-cylinder engine, this lawn tractor can handle different terrains, providing ample power to cut through thick grass and tackle hilly landscapes. The engine is designed for ease of maintenance, ensuring that users can keep their machine in top condition without unnecessary hassle.

The cutting deck is another highlight of the LTH1742T. It comes with a 42-inch cutting width, making it suitable for medium to large yards. The deck features a triple-blade system, allowing for a clean and even cut, which not only enhances the appearance of your lawn but also promotes healthy grass growth. The cutting height is easily adjustable, offering six different positions so users can customize their mowing experience based on grass type and seasonal requirements.

The Husqvarna LTH1742T is designed with comfort in mind. The ergonomic seating provides ample support during long mowing sessions, while the steering wheel is positioned for optimal control. Another convenient feature is the easy-to-use automatic transmission, which allows for smooth acceleration and simple maneuvering without the need for constant gear shifting.

In terms of safety, the LTH1742T is equipped with an electric start system that eliminates the need for manual crank-starts. The safety features also include an operator presence switch, ensuring that the tractor will not operate unless the user is seated.

Additionally, this lawn tractor incorporates Husqvarna's innovative technologies such as the Air Induction Mowing Technology, which enhances airflow within the deck to provide superior cutting performance and ensures better grass collection.

Overall, the Husqvarna LTH1742T is engineered for efficiency, comfort, and performance. Its combination of power, cutting capabilities, and user-centric design makes it an excellent choice for homeowners looking to achieve a well-manicured lawn with minimal effort. Whether tackling overgrown areas or maintaining a well-kept yard, the LTH1742T stands out as a dependable workhorse ready for any challenge.
Top Page Image Contents