SERVICE AND ADJUSTMENTS
A
E
B
FIG. 16
F
J
H
•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring.
•Repeat on opposite side of tractor.
C
D
FIG. 18
•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F).• Insertend of link (E) into hole in front mower bracket and secure with washer and retainer spring (J).
•Install belt on engine pulley (M), in belt keepers (G).
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.
•Raise attachment lift lever to highest position.
•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
FIG. 17
•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D)
on rear mower bracket and secure with washer and | M |
|
retainer spring. |
| |
| F | |
| G | |
|
| |
R |
| G |
Q |
|
|
| A | E |
B
PC
K
L D
FIG. 19A
20
