Husqvarna RZ4219BF / 966582201 manual Controls, Control Locations

CONTROLS

This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton 19 HP* four-stroke overhead valve engine.

Transmission from the engine is made via belt-driven hydraulic pumps. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.

Control Locations

1 2 10 3 4

E

L

T

T

O

R

H

T

8058-070-1

5 6 78 9

1.	Cutting height handle	6.	Blade control lever
2.	Park brake	7.	Fuel tank cap
3.	Throttle control	8.	Fuel shut off valve
4.	Ignition switch	9.	Bypass linkage
5.	Motion control levers	10.	Choke control

*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed

in the final machine will depend on the operating speed, environmental conditions and other variables.

17