MAINTENANCE

Tire Pressures

All tires should be at 15 psi / 103 kPa / 1 bar.

Anti-scalp Rollers

IMPORTANT INFORMATION

Adjust anti-scalp rollers with the mower on a flat level surface.

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

Anti-scalp rollers can be set in four positions. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck.

IMPORTANT INFORMATION

To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck.

8011-564

Check tire pressures

8058-135

Anti-scalp rollers

39

Page 39
Image 39
Husqvarna RZ4623/967009801 warranty Tire Pressures, Anti-scalp Rollers