CONTROLS
Blade Switch
To engage the mower deck, pull the blade switch knob up. The mower blades are disengaged when the knob is pressed down.
Ignition Switch
The ignition switch is placed on the control panel and is used to start and stop the engine.
See SmartSwitch Ignition and Starting in the Operation section for instructions.
SmartSwitch Courtesy Buttons
A battery voltage light indicates that voltage is below the normal operating power.
Button 1 can be used to check the battery condition. See Battery Voltage Light in the Operation section.
Button 2 will turn on/off the headlights. See Headlights in the Operation section.
Blade switch
Ignition switch
1 | 2 |
| |
|
1.Battery voltage light
2.Headlights indicator Courtesy lights
21
