Husqvarna T435 manual Technical data

MAINTENANCE
Technical data
	T435
Engine
Cylinder displacement, cm3	35,2
Cylinder bore, mm	40
Stroke, mm	28
Idle speed, rpm	2900
Recommended max. speed, rpm	12500
Power, kW/ rpm	1,5/10000
Ignition system
Manufacturer of ignition system	Ikeda Denso
Type of ignition system	CD
Spark plug	NGK CMR7H
Electrode gap, mm	0,5
Fuel and lubrication system
Manufacturer of carburettor	Walbro
Carburettor type	WT 804
Fuel tank capacity, litre	0,26
Oil pump capacity at 9,500 rpm, ml/min	3-9
Oil tank capacity, litre	0,17
Type of oil pump	Automatic
Weight
Chain saw without bar or chain, empty tanks, kg	3,4
Noise emissions (see note 1)
Sound power level, measured dB(A)	112
Sound power level, guaranteed LWA dB(A)	114
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)	103
Vibration levels (see note 3)
Front handle, m/s2	4,1
Rear handle, m/s2	3,9
Chain/bar
Standard bar length, inch/cm	14"/35
Recommended bar lengths, inch/cm	12-14”/30-35
Usable cutting length, inch/cm	11-13”/28-33
Chain speed at max. power, m/sec	19,1
Pitch, inch/mm	3/8" /9,52
Thickness of drive links, inch/mm	0,050/1,3
Number of teeth on drive sprocket	6

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for

noise pressure levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.

Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration

levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.

English – 37