Stopping | Husqvarna T435 manual

STARTING AND STOPPING

the engine starts, quickly apply full throttle; the throttle start lock will automatically disengage.

IMPORTANT! As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by quickly disengaging the throttle lock. This prevents unnecessary wear to the clutch, clutch drum and brake band.

Note! Reactivate the chain brake by pushing the front hand guard back towards the front handle. The chain saw is now ready for use.

WARNING! Long term inhalation of the

! engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

• Never start a chain saw unless the bar, chain and all covers are ﬁtted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury.

•The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw.

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Always hold the saw with both hands. The right hand should be on the top handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a ﬁrm grip with thumbs and ﬁngers encircling the chain saw handles.

Stopping

The engine is stopped by pushing the stop switch to the stop position.

20 – English

Image 20

Husqvarna T435 manual Stopping

Contents

T435 Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Introduction Dear Customer What is WHAT? What is what on the chain saw? Always use common sense General Safety PrecautionsBefore using a new chain saw Machine′s safety equipment Personal protective equipment Chain brake and front hand guard Vibration damping system Throttle lockoutChain catcher Stop switch Cutting equipmentMufﬂer General rules Sharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackBar Chain Too large General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Adjustment of depth gauge setting Tensioning the chainLubricating cutting equipment Cause serious or even fatal injury Filling with chain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipment Bar Assembly Fitting the bar and chainFitting a spike bumper Working with the chain Fuel Handling Fuel Fuel safety FuellingTransport and storage Long-term storage Starting and Stopping Starting and stoppingCold engine Warm engine Stopping Basic safety rules Working TechniquesBefore use General working instructions Always use a fast cutting speed, i.e. full throttle English Preparing to use the saw in the tree Using the chainsaw in the treeGeneral requirements working at height Basic cutting technique Working Techniques Felling technique for tree tops LimbingSafe distance Felling direction Cutting trees and branches that are in tension Freeing a tree that has fallen badlyFelling cut How to avoid kickback What is kickback?General advice Cutting the trunk into logs General MaintenanceCarburettor adjustment Correctly adjusted carburettor High speed jet H Mufﬂer Starter Changing a broken or worn starter cord Fitting the starter Tensioning the recoil springChanging a broken recoil spring Air ﬁlter Spark plugLubricating the bar tip sprocket Must always be replaced Cooling system Adjustment of the oil pumpRunning when making adjustments Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical data Bar and chain combinations Saw chain ﬁling and ﬁle gauges EC-declaration of conformityApplies to Europe only Cispr 122001, EN ISOPage Page Page ´z+S?h¶6¨ Page 1151317-26