Husqvarna T536 Battery Handling, Battery status, Battery charger, Connect the battery charger

BATTERY HANDLING

Battery status

The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an error has occurred. See fault codes.

1 2 3 4

LED lights	Battery status
All LEDs are lit	Fully charged (75-100%).
LED 1, LED 2, LED 3 are lit.	The battery is 50%-75%
	charged.
LED 1, LED 2 are lit.	The battery is 25%-50%
	charged.
LED 1 is lit.	The battery is 0%-25%
	charged.
LED 1 flashes	The battery is empty.
	Charge the battery.

Battery charger

!	WARNING! Risk of electric shock and
	short circuiting. Use approved and intact
	wall sockets. Make sure that the cable is
	not damaged. Replace cable if it appears
	to be damaged in any way.

Connect the battery charger

•Connect the battery charger to the voltage and frequency specified on the rating plate. Put the electric plug in a earthed socket-outlet. The LED on the battery charger flashes green once.

•The battery will not be charged if the battery temperature is over 50 °C. In that case the battery charger will actively cool down the battery.

Connect the battery to the battery charger

Regularly check that the battery charger and the battery are intact. See also instructions under the Maintenance heading.

The battery must be charged before using it the first time. The battery is only 30% charged when delivered.

•Put the battery in the battery charger. Make sure that the battery is connected to the battery charger.

•The green charging light on the charger is lit when the battery is connected to the battery charger.

•When all LEDs are lit the battery is fully charged.

1 2 3 4

•Pull out the plug. Never jerk the power supply cable to disconnect it from the wall socket.

•Remove the battery from the battery charger.

Charging status

Lithium-ion batteries can be charged at whatever charging level. The charging process can be cancelled or started whatever the battery’s charge level is. A fully charged battery will not lose its charge even when the battery is left in the charger. Remove a fully charged battery from the battery charger.

1 2 3 4

English – 21