SERVICE AND ADJUSTMENTS
A
B
FIG. 18
•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F).
•Insert end of link (E) into hole in front mower bracket and secure with washer and retainer spring (J).
E
•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring.
F
J
H
C
D
FIG. 20
•Hook end of clutch cable spring (Q) into hole in idler arm (R).
•Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K).
•Install belt on engine pulley (M), in belt keepers (G).
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.
•Raise attachment lift lever to highest position.
•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
FIG. 19 | G M | F |
|
| |
Q | R | G |
| ||
|
| |
| A | E |
P
B
C
K
L D
19
