STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 23 Page 25
Page 24
Image 24
Husqvarna YTH20F42T owner manual Storage, Other, Fuel System, Engine OIL, Cylinders
Page 23 Page 25

YTH20F42T specifications

The Husqvarna YTH20F42T is a versatile and efficient riding lawn mower designed to meet the demands of residential lawn care. With its robust construction and user-friendly features, this model has gained popularity among homeowners looking for a reliable mowing solution.

At the heart of the YTH20F42T is a powerful 20 horsepower Kohler engine, providing ample power to tackle various terrain types. This engine not only ensures efficient mowing but also enhances overall durability and longevity. The automatic hydrostatic transmission allows for seamless speed adjustments and smooth transitions, making it easy to navigate around obstacles and varying landscape features.

One standout feature of the Husqvarna YTH20F42T is its 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting capacity. This deck size allows users to cover more ground in less time, making it suitable for medium to large-sized yards. The cutting height can be easily adjusted from 1.5 to 4 inches, giving users the flexibility to achieve their desired lawn appearance.

The mower is equipped with a washout port, facilitating quick and simple cleaning of the cutting deck. This feature enhances the mower’s maintenance routine, ensuring it operates efficiently and prolonging the life of the blades. Additionally, the mulching capability allows for nutrient recycling, promoting a healthier lawn while reducing the need for bagging grass clippings.

Comfort is not overlooked in the design of the YTH20F42T. It features an ergonomic seat with good back support, designed to keep users comfortable even during extended mowing sessions. The steering wheel is also positioned for easy access and control, enhancing the overall user experience.

Safety features, such as the automatic shutoff when the operator leaves the seat, provide peace of mind while operating the mower. The headlights ensure visibility during early morning or late evening mowing, making this mower a reliable choice any time of day.

In summary, the Husqvarna YTH20F42T combines power, efficiency, and comfort, making it an excellent choice for homeowners looking to maintain their lawns with ease. From its reliable engine to innovative features, this riding mower stands out as a go-to solution for effective lawn care.
Top Page Image Contents