SERVICE AND ADJUSTMENTS

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 32)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 32

TO START ENGINE WITH A WEAK BATTERY (See Fig. 33)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

WEAK OR DEAD

FULLY CHARGED

BATTERY

BATTERY

FIG. 33

REPLACING BATTERY (See Fig. 34)

WARNING: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from accidental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

SEAT PAN

02602

TERMINAL

 

NUT

COVER

 

 

BOLT

 

 

POSITIVE

 

NEGATIVE

(RED)

 

 

(BLACK)

CABLE

 

 

CABLE

 

02603

FIG. 34

22

Page 22
Image 22
Husqvarna YTH21K46, 96045002100 Front Wheel TOE-IN/CAMBER, To Remove Wheel for Repairs See Fig, Replacing Battery See Fig

96045002100, YTH21K46 specifications

The Husqvarna YTH21K46 is a robust and efficient riding mower, designed for homeowners who demand reliability, performance, and ease of use in maintaining their lawns. Powered by a strong 21.5 HP Kohler engine, this riding mower provides ample power to tackle various mowing conditions while ensuring durability and long-lasting performance.

One of the standout features of the YTH21K46 is its 46-inch cutting deck. This deck allows for efficient mowing of medium to large-sized lawns, covering more ground in fewer passes. The cutting height can be easily adjusted via a rugged lever, offering six different positions ranging from 1 to 4 inches. This versatility enables users to achieve the desired lawn appearance while accommodating different grass types and seasonal conditions.

An important technological feature included in this model is the ReadyStart system, which allows for easy engine start-up without the need to prime, enhancing user convenience. This, combined with the smooth hydrostatic transmission, provides seamless acceleration and deceleration, making it simple to navigate around obstacles and tight spaces. The steering wheel is ergonomically designed, ensuring comfort and ease of control during operation.

The Husqvarna YTH21K46 also boasts a comfortable and spacious operator's platform, which includes an adjustable seat to accommodate different user heights, promoting an enjoyable mowing experience. The optimized design creates an ideal driving position, reducing fatigue during extended use. Moreover, a front-mounted bumper adds protection and enhances the thermal efficiency of the mower.

In addition to its cutting capabilities, this riding mower is designed with functionality in mind. The integrated LED headlights improve visibility during early morning or late evening mowing sessions. A washout port makes it easy to clean the cutting deck, ensuring optimal performance and longevity.

Lastly, the YTH21K46 supports various attachments and accessories, including mulching kits, baggers, and snow blades, expanding its versatility for year-round lawn care. This adaptability means it's not just a seasonal mower; it serves as a multifunctional tool to help maintain your property in every season.

With its blend of powerful performance, user-friendly design, and smart technologies, the Husqvarna YTH21K46 provides homeowners a reliable solution for achieving a well-manicured lawn.