hussman GSVM installation instructions Warranty Parts Procedure, Compressor Replacement Procedure

WARRANTY PARTS PROCEDURE

Same as first three items in Ordering Replacement Parts Procedure.

Give original installation date of cabinet and, if possible, forward a copy of the original invoice or delivery receipt.

All shipments of in-warranty replacement parts will be invoiced from the factory until such time as the defective part is returned and proved to be defective by our Quality Control Department.

Contact your Hussmann Distributor for instructions on returning in-warranty parts.

Warranty parts must be returned to the factory within 30 days of date of failure to assure proper disposition.

Lack of any of the above information may result in the shipment of the wrong part, or a delay in shipment.

COMPRESSOR REPLACEMENT PROCEDURE –

Replacement compressors will not be shipped from the Hussmann factory. They may be obtained from you nearest Copeland Wholesaler.

Your wholesaler will replace, free of charge, any compressor found to be defective within twelve months of installation, not to exceed twenty months from the date of manufacture – as determined by the compressor serial number on the compressor serial plate.

For any defective compressor beyond the twelve or twenty month time period, a salvage value credit will be given too partially offset the invoice for the replacement.

To obtain reimbursement forward to: Hussmann Corporation 140 East State Street Gloversville, NY

12078

the following information:

The cabinet model and serial number

2. A copy of the wholesaler’s invoice, along with a copy of the salvage value credit.

18