IGSS-FMSS-0301

Installation (cont.)

LOCATION

The refrigerated merchandisers have been designed for use only in air conditioned stores where temperature and humidity are maintained at or below 75°F and 55% rela- tive humidity. DO NOT allow air conditioning,electric fans, ovens, open doors or windows (etc.) to create air cur- rents around the merchandiser, as this will impair its cor- rect operation.

Product temperature should always be maintained at a constant and proper temperature. This means that from the time the product is received, through storage, prepa- ration and display, the temperature of the product must be controlled to maximize life of the product.

UNCRATING THE STAND

Place the fixture as close to its permanent position as possible. Remove the top of the crate. Detach the walls from each other and remove from the skid. Unbolt the case from the skid. The fixture can now be lifted off the crate skid. Lift only at base of stand!

EXTERIOR LOADING

These models have not been structurally designed to sup- port excessive external loading. Do not walk on their tops; This could cause serious personal injury and dam- age to the fixture.

SETTING AND JOINING

The case that the FMSS connects to (the parent case) through the rear of the case must be leveled and set prior to installing the FMSS.The sectional construction of these models enable them to be joined in line - to give the effect of one continuous display.A joint Trim Kit is supplied with each case line to cosmetically “mask” the sectional joints. See the “Finishing Touches” section for more information on joint trim.

Determine the highest point of the floor; cases will be set off this point.

2.Level and set the first case, carefully guiding the electrical, regfrigeration and drain lines through the parent case. Case must be raised under legs where support is best to prevent damage to case. Internal bracing may be removed at this time.

3.Set second case as close as possible to the first case carefully guiding its electrical, refrigeration and drain lines through the parent case, and level case to the first using the instructions in step one.

4.Apply masking tape 1/8" in from end of case on inside and outside rear mullion on both cases to be joined.

5.Apply liberal bead of case joint sealant (butyl) to dotted area shown in (Fig.2, #1) of first case. Apply heavy amount to cover entire shaded area.

DO NOT USE PERMAGUM!

Fig. 2, #1

LEVELING

IMPORTANT! It is imperative that cases be lev- eled from front to back and side to side prior to joining.A level case is necessary to insure proper operation, water drainage, glass alignment, and operation of the hinges supporting the glass. Lev- eling the case correctly will solve most hinge op- eration problems.

NOTE: A. To avoid removing concrete flooring, begin lineup leveling from the highest point of the store floor.

B. When wedges are involved in a lineup, set them first.

All cases were leveled and joined prior to shipment to insure the closest possible fit when cases are joined in the field. When joining, use a carpenters level and shim legs accordingly. Case must be raised correctly, under legs where support is best, to prevent damage to case.

1. Check level of floor where cases are to be set.

It is the contractor’s responsibility to install case(s) according to local construction and health codes.

6.Slide second case up to first case snugly.Then level second case to the first case so glass front, bumper and top are flush.

Do not use the top bracket on the rear mullion

to pull the cases together.

4

Page 3 Page 5
Page 4
Image 4
hussman IGSS-FMSS-0301 manual Leveling, Location, Uncrating the Stand, Exterior Loading, Setting and Joining
Page 3 Page 5

IGSS-FMSS-0301 specifications

Hussman IGSS-FMSS-0301 is a state-of-the-art frozen food merchandising display unit designed to meet the demands of modern retail environments. This innovative piece of equipment is tailored for supermarkets, convenience stores, and food service operations looking to optimize their frozen food sales. With its sleek design and advanced technology, the IGSS-FMSS-0301 enhances product visibility while ensuring optimal preservation of goods.

One of the main features of the IGSS-FMSS-0301 is its exceptional energy efficiency. Incorporating the latest in refrigeration technology, it utilizes a highly efficient compressor system that minimizes power consumption while maintaining ideal temperatures for frozen products. This contributes significantly to reduced operational costs, making it an environmentally friendly choice for retailers.

The display case boasts an impressive capacity, allowing retailers to showcase a wide range of frozen products, from ice cream and frozen meals to ready-to-eat options and frozen vegetables. Its adjustable shelving and modular design provide flexibility in product placement, enabling users to customize the layout according to their merchandising needs. Additionally, the glass front and top offer maximum visibility, encouraging impulse purchases by allowing customers to easily see the products available.

In terms of technology, the IGSS-FMSS-0301 is equipped with advanced digital temperature controls, which ensure that the internal environment remains stable and consistent. This feature is crucial for maintaining the integrity of frozen goods and preventing freezer burn or spoilage, ultimately enhancing customer satisfaction. The unit also incorporates an automatic defrost system, which minimizes maintenance and ensures reliable performance throughout its lifespan.

Furthermore, the Hussman IGSS-FMSS-0301 is designed with user convenience in mind. It is easy to access and restock, facilitating efficient operation for store staff. The robust construction ensures durability, and the attractive exterior can complement any retail setting.

In conclusion, the Hussman IGSS-FMSS-0301 stands out with its energy efficiency, spacious design, advanced technology, and user-friendly features. It serves as an ideal solution for retailers aiming to enhance their frozen food merchandising while ensuring optimal product presentation and preservation. This display unit not only boosts sales potential but also reinforces the overall shopping experience by making frozen items easily accessible and appealing to consumers.
Top Page Image Contents