P/N 0425683F

®

shelf and over the lamp tube and wires. The top part of the diffuser must be below the honeycomb retainer and above the lamp tube. The bottom filler need not be removed. See Figure 20.

Diffuser

5.Next, remove the lamp-holder from the lamp and pull the lamp out of the bottom lamp-holder.

Remove lamp-holder

Bottom Filler

Figure 20.

Removing Diffuser from Center Mullion Lamp

4.Pull the top lamp-holder out of the lamp- holder bracket as shown below.

Pull

lamp-holder

lamp-holder Bracket

Remove Lamp from Bottom lamp-holder

6.Remove the tube guard from old lamp and place it on the new lamp.

7.Install the new lamp in reverse order. Ensure lamp pins line up with lamp-holder holes as shown below, and that lamp-holder is fully engaged in lamp-holder bracket.

Lamp

12

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM