Page 24 | PROTOCOL™ |
P/N 374511B |
|
DEFROST MENU (continued) |
|
WITH THE CURSOR ON A CIRCUIT NUMBER, press the
ENT key to open that circuit submenu.
CIRCUIT #6 - REFR
Press the CLR key. Key in the applicable Lineup name. Press ENT. Repeat for NAME, NUMBER/DAY,
DEFR LENGTH and 1ST DEFR HOUR:MINUTES.
Note: To key in name, press Shift Upper to use the red (upper) letters and Shift Lower to use the blue (lower) letters.
Three different types of defrost may be used: Offtime
Gas Electric
Using the 
key, toggle to the desired defrost type. Press ENT.
The amperage number is used for electric defrosts to turn off compressors and reduce overall amp draw.
Using the 
key, toggle between ENABLED / DISABLED for defrost termination. Press ENT.
Note: the termination signal is provided by the appropriate Auxiliary input (i.e., AUX1 for CKT1, AUX2 for C KT2, …).
The remaining defrosts are listed. The control panel spaces the number of defrosts evenly across a 24 hour day. To customize the defrost schedule, press the CLR key. Key in the applicable hour for defrost start. (Defrost times can be entered on the quarter hour
ENT.
Press ESC to return to previous screen and to return to VIEW / SET ITEMS MENU.
Press ESC again to return to DEFROST MENU.
Hand Held Device
DEFROST MENU
CIRCUIT SYSTEM STATUS
5 00 N/A
6 | 00 | N/A |
7 00 N/A
8 00 N/A
PRESS ENT TO SET
CIRCUIT #6 - REFR
NAME | - |
|
DEFR TYPE | - | OFTIM |
NUMBER/DAY | - | 03 |
DEFR LENGTH | - | 15 |
1ST DEFR | - | 00:00 |
AMPERAGE | - | 00 |
CIRCUIT #6 - REFR
DEFR TERM | - | ENABLED |
2ND DEFR | - | 08:15 |
3ND DEFR | - | 16:00 |
END OF DEFROSTS
HUSSMANN CORPORATION • BRIDGETON, MO | 970307 |