Stop

handleHeight adjusting

stop

Figure 3-17

Anti-scalp

wheel

Adjusting holes

Figure 3-18

Anti-scalp wheels

Anti-scalp wheel kits are standard on Hustler Mid Mount Z units. These anti-scalp wheels are designed to minimize scalping when mowing on rough uneven terrain.

After setting the cutting height, adjust the front anti-scalp wheels so they extend below the deck but do not contact the ground. They should always be at least 1/4” to 3/4” (6.35MM to 19.05MM) below the deck. With the unit sitting on a flat level surface, the front wheel position can be adjusted up or down as needed from 3/4” to 1-3/4” (19.05MM to 44.45MM) below the blade surface. Move the front wheels up or down, in 1/2” (12.70MM) increments, using the different axle mount holes in the wheel mount bracket. Fig. 3-17

When adjusting the rear anti-scalp wheels, the wheel should be in the lower axle mount hole when the front anti-scalp wheels are in the lower or middle axle mount holes. When the front wheels are in the upper axle mount hole, the rear wheels should be in the upper axle mount hole as well.

NOTE: When the anti-scalp wheels are installed, the minimum cutting height is 1” (2.5 CM) with the anti-scalp wheels set at 3/4” (1.91CM).

Rear

mount

legs

Front

mount

legs

Figure 3-19

BAC-VACTMMounting

If a BAC-VAC™ is to be mounted to an Hustler ATZ tractor it will be necessary to remove the following from the unit:

1.Drive wheel weights

2.Frame weights located between the drive wheels

3.The front and rear mount legs of the ROPS structure. The two post ROPS structure will remain. Fig. 3-19

The weights included with the BAC-VAC™ will be used instead of the Hustler ATZ tractor weights.

If a BAC-VAC™ is mounted to the Hustler ATZ it will be necessary to remove the BAC-VAC™ and front wheel weights from the tractor and it will be necessary to re-attach the drive wheel weights, frame weights and the front and rear mount legs to the tractor before operating the unit on a slope.

18

601656_0308

Page 18 Page 20
Page 19
Image 19
Hustler Turf ATZ, Super Z, Z Shibaura Diesel manual Anti-scalp wheels, BAC-VACTMMounting, Rear Mount Legs Front
Page 18 Page 20

Z, ATZ, Z Shibaura Diesel, Super Z specifications

The Hustler Turf Super Z, powered by the advanced Shibaura Diesel engine, is a high-performance mower designed for serious landscapers and lawn care professionals. The Super Z series stands out for its unmatched speed, efficiency, and durability, making it ideal for tackling large properties and commercial landscaping jobs.

One of the main features of the Super Z is its innovative design, which combines a powerful diesel engine with an ergonomic chassis. The Shibaura Diesel engine is renowned for its reliability and fuel efficiency, providing ample torque to power through tough grass and uneven terrain without compromising performance. This robust engine not only enhances the mower’s productivity but also ensures a longer lifespan.

The Super Z boasts a cutting width of up to 72 inches, allowing users to cover large areas in a fraction of the time compared to traditional mowers. Its patented Easy-Flo deck design guarantees a superior cut quality, resulting in a professional finish on every lawn. The mower's adjustable cutting heights cater to various grass types and user preferences, while the high blade tip speed ensures a clean, precise cut with minimal clumping.

Technologically, the Hustler Turf Super Z features the industry-leading Smart Ride suspension system, which significantly improves operator comfort by absorbing bumps and vibrations during operation. This is particularly beneficial during long hours of mowing, reducing fatigue and enhancing overall productivity. The user-friendly controls provide intuitive handling, making it easy for operators to maneuver the mower around obstacles efficiently.

Durability is another hallmark of the Super Z series. Constructed from heavy-duty materials, the mower can withstand rigorous use in challenging environments. Additionally, the enhanced maintenance accessibility allows for quicker service and upkeep, minimizing downtime and ensuring the mower is always ready for work.

In summary, the Hustler Turf Super Z with Shibaura Diesel engine is engineered for those who demand precision, power, and efficiency in their mowing equipment. Its advanced features and technologies make it a top choice for professionals looking to deliver exceptional results while maximizing productivity in their lawn care operations. Whether tackling large estates or commercial landscapes, the Super Z is a reliable partner for any mowing challenge.
Top Page Image Contents