If you lose steering control while operating the machine, place the steering control levers in the park brake position immediately. Inspect the machine and involve your Hustler dealer to resolve the problem before continuing to operate.

If pump belt fails, steering control will be lost. Refer to owner’s manual for inspection and replacement intervals and refer to above paragraph for emergency procedures.

600899

Part Number

600899

Avoid skin contact with battery acid. Always wear eye protection when checking the battery, acid can cause serious injury to skin and eyes. If contact occurs, flush area with clean water and call physician immediately. Acid will also damage clothing.

Do not allow open flame near the battery when charging.

Hydrogen gas forms inside the battery. This gas is both toxic and flammable and may cause an explosion if exposed to flame. Always remove the negative ground first and replace it last.

Do not overfill battery.

Electrolyte may overflow and damage paint, wiring or structure. When cleaning the battery, use soap and water. Be careful not to get soap and water into the battery. Use soda mixed in water to clean corrosion off the terminals.

Avoid crushing

Do not jump if machine tips Use seat belt

Seat belt must be fastened while operating this machine. Failure to use seat belt will result in serious injury in the event of a roll over.

Keep engine and pump compartment(s) clean (especially in exhaust area) to prevent fire and provide maximum engine and hydraulic cooling.

If you loose steering control while operating the machine, place the steering control levers in the park brake position immediately. Inspect the machine and involve your Hustler dealer to resolve the problem before continuing to operate.

If pump belt fails, steering control will be lost. Refer to owner’s manual for inspection and replacement intervals and refer to above paragraph for emergency procedures.

Hydraulic fluid escaping under pressure can penetrate skin.

Hydraulic fluid may also cause infection in a minor cut or opening in the skin; if exposed to hydraulic fluid, see a doctor at once.

Before applying pressure to hydraulic system, make sure all connections are tight and all hoses and lines are in good condition.

Relieve all pressure in the system before disconnecting or working on hydraulic lines.

To find a leak under pressure, use a piece of cardboard or wood – never use your hands.

To relieve all pressure in system, turn engine off and lower attachment.

601635

Part Number

601635

601635

This structure’s protective capability may be impaired by structural damage, overturn, or alteration. If any of these conditions occur, this structure must be replaced.

Avoid crushing, use seat belt. Do not jump if machine tips.

To minimize chance of injury or death from rollover; keep ROPS in the raised and locked position and use the seat belt.

Never operate machine on a slope with the ROPS folded down (lowered position).

There is no roll over protection when the ROPS is in the lowered position. Lower the ROPS only when absolutely necessary. Drive slowly and carefully. Raise the ROPS as soon as clearance permits. Read and follow slopes operation instructions and warnings. Do not wear seat belt when the ROPS is in the lowered position.

This structure’s protective capability may be impaired by structural damage, overturn, or alteration. If any of these conditions occur, this structure must be replaced.

Avoid crushing, use seat belt. Do not jump if machine tips.

To minimize chance of injury or death from rollover; keep ROPS in the raised and locked position and use the seat belt.

Never operate machine on a slope with the ROPS folded down (lowered position).

There is no roll over protection when the ROPS is in the lowered position. Lower the ROPS only when absolutely necessary. Drive slowly and carefully. Raise the ROPS as soon as clearance permits. Read and follow slopes operation instructions and warnings. Do not wear seat belt when the ROPS is in the lowered position.

Always pull from the tractor hitch. Do not attach chains or ropes to the ROPS for pulling purposes, as the machine can tip backwards.

6

601656_0308

Page 6 Page 8
Page 7
Image 7
Hustler Turf ATZ, Super Z, Z Shibaura Diesel manual Part Number 600899, Part Number 601635
Page 6 Page 8

Z, ATZ, Z Shibaura Diesel, Super Z specifications

The Hustler Turf Super Z, powered by the advanced Shibaura Diesel engine, is a high-performance mower designed for serious landscapers and lawn care professionals. The Super Z series stands out for its unmatched speed, efficiency, and durability, making it ideal for tackling large properties and commercial landscaping jobs.

One of the main features of the Super Z is its innovative design, which combines a powerful diesel engine with an ergonomic chassis. The Shibaura Diesel engine is renowned for its reliability and fuel efficiency, providing ample torque to power through tough grass and uneven terrain without compromising performance. This robust engine not only enhances the mower’s productivity but also ensures a longer lifespan.

The Super Z boasts a cutting width of up to 72 inches, allowing users to cover large areas in a fraction of the time compared to traditional mowers. Its patented Easy-Flo deck design guarantees a superior cut quality, resulting in a professional finish on every lawn. The mower's adjustable cutting heights cater to various grass types and user preferences, while the high blade tip speed ensures a clean, precise cut with minimal clumping.

Technologically, the Hustler Turf Super Z features the industry-leading Smart Ride suspension system, which significantly improves operator comfort by absorbing bumps and vibrations during operation. This is particularly beneficial during long hours of mowing, reducing fatigue and enhancing overall productivity. The user-friendly controls provide intuitive handling, making it easy for operators to maneuver the mower around obstacles efficiently.

Durability is another hallmark of the Super Z series. Constructed from heavy-duty materials, the mower can withstand rigorous use in challenging environments. Additionally, the enhanced maintenance accessibility allows for quicker service and upkeep, minimizing downtime and ensuring the mower is always ready for work.

In summary, the Hustler Turf Super Z with Shibaura Diesel engine is engineered for those who demand precision, power, and efficiency in their mowing equipment. Its advanced features and technologies make it a top choice for professionals looking to deliver exceptional results while maximizing productivity in their lawn care operations. Whether tackling large estates or commercial landscapes, the Super Z is a reliable partner for any mowing challenge.
Top Page Image Contents