Hustler Turf M-1 manual Upper handle

WARNING: Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing them.

1. Attach the lower handle to the mower with flanged nuts. Fig. 4-2

6

3

Fig. 4-2

2. Assemble the upper handle to the lower handle . Use the holder 13 on the right hand side and the two bolts on the left hand side and the flanged cap nuts

. Fig. 4-3 and Fig. 4-4

7

3

Upper handle 13

Fig. 4-3

Upper handle

9

7

3

Fig. 4-4

3.Remove the lower bolt and attach the bar 11 to the

mower as shown. Fig. 4-5. Start the bolt in the hole but do not tighten. Install the bracket to the lower handle and attach the bar 11 using hardware and (flanged cap nut not shown). Tighten all of the hard- ware. Fig. 4-5 and Fig. 4-6

11

Lower bolt

Fig. 4-5

Lower handle

11

10

8

Fig. 4-6

NOTE: When adjusting the height of the handle, loosen the bolt on the bar 11 , before loosening the handle height adjustment bolt. Fix the cable harness to the handle with velcro straps so that they do not inter- fere with the opening / closing of the guard or opera- tion of the machine. The cable harness should be routed under the lower handle. Fig. 4-7 and Fig. 4-8

Loosen bolts to

adjust height

Fig. 4-7

4-4 108548_1208