5.Fill engine with the proper oil and quantity per the engine manufacturer’s recommendation.

Oil pan

Oil drain

 

plug

Fig. 5-2

WARNING: Always wear adequate eye protection when grinding mower blades.

WARNING: Failure to correctly torque the blade mounting bolts may result in the loss of the blade which can cause serious injury.

A.Checking the blade

1.When checking the blade, lay the mower on it’s side with the carburetor on the upside.

2.Confirm that the blade is not chipped, bent or worn. Fig. 5-3

3.If the blade or the blade bolts are damaged, replace with Hustler approved parts.

4.Torque the blade bolts to 26.0 33.0 ft.-lbs (35 - 45 Nm). Fig. 5-4

Engine air filter

Perform engine air filter maintenance per the engine’s owner’s manual.

General engine maintenance

Detailed instructions and recommendations for break-in and regular maintenance are specified in the Engine Owner’s manual. Please refer to this manual for engine servicing, lubricating oil levels with quality and viscosity recommendations, bolt torques, etc. The engine warranty is backed by the manufacturer. Special attention should be paid to applicable data which will not be duplicated here.

WARNING: Do not change engine governor setting or overspeed the engine.

Mower blade maintenance

Check the mower blade daily, it is the key to power efficiency and well groomed turf. Keep it sharp, a dull blade will tear rather than cut the grass, leaving a brown ragged top on the grass within a few hours. A dull blade also requires more power from the engine.

Replace any blade which is bent, cracked or broken.

WARNING: Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing them.

WARNING: Never attempt to straighten a bent blade by heating, or weld a cracked or broken blade as the blade may break and cause serious injury. Replace worn or damaged blades.

DANGER: Never work with blades while engine is running. Always disconnect the spark plug wire from spark plug when working under the mower. Wear gloves when handling blades. Always check for blade damage if mower strikes a rock, a branch or other foreign objects during mowing!

New blade

Chip

Bend

Wear

Fig. 5-3

B.Replacing the blade

1.Lay the mower on it’s side with the carburetor on the upside.

2.Loosen the blade mounting bolts and remove the blade.

3.Clean the underneath side of the mower housing and around the blade mounting bracket.

4.Attach blade using the blade mounting bolts and torque between 26 - 33 ft.-lbs (35 - 45 Nm). Fig. 5-4

NOTE: Check the blade for balance following grinding. A commercial balancing tool is available through most hardware supply stores, or balancing can be done by placing the blade on an inverted line punch. Blade should not lean or tilt. Spin the blade slowly, blade should not wobble. If blade is out of bal- ance, true it up before reinstalling.

Bolts

Blade

Torque to

 

26 - 33 ft.-lbs.

 

(35 - 45 Nm)

 

Fig. 5-4

WARNING: Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing them.

108548_1208

5-3

Page 21 Page 23
Page 22
Image 22
Hustler Turf M-1 manual Checking the blade, Replacing the blade
Page 21 Page 23

M-1 specifications

Hustler Turf M-1 is a leading name in the world of commercial mowers, designed meticulously to cater to the needs of lawn care professionals and landscaping companies. This innovative mower showcases Hustler's commitment to performance, efficiency, and ease of use, making it a top choice for those requiring reliable equipment for large-scale mowing tasks.

One of the main features of the Hustler Turf M-1 is its impressive cutting capacity. Equipped with a powerful engine, the M-1 can tackle extensive areas of grass with ease, providing a clean, even cut every time. The mower boasts a wide cutting deck, which can range from 48 to 72 inches, allowing for fewer passes over large properties and significantly reducing mowing time. This efficiency is crucial for professionals who need to maintain productivity and meet tight schedules.

The M-1 is also designed for optimal maneuverability. Its compact design, combined with a responsive steering system, allows users to navigate tight corners and intricate landscapes without hassle. This is further enhanced by its low center of gravity, which not only contributes to stability but also ensures comfortable handling on slopes and uneven terrains.

In terms of technology, the Hustler Turf M-1 incorporates advanced features that increase productivity and user comfort. The mower is equipped with an intuitive control panel, providing easy access to all functions. Operators can quickly adjust cutting heights, manage speed settings, and monitor engine performance, creating a streamlined mowing experience.

Additionally, Hustler has integrated innovative maintenance technologies into the M-1. The mower features easily accessible service points, simplifying routine upkeep and reducing downtime. The robust construction of the M-1 means it's built to last, with durable materials that can withstand the rigors of daily commercial use.

Comfort is another hallmark of the Hustler Turf M-1. The ergonomic seat design, adjustable armrests, and user-friendly controls ensure that operators can work for extended periods without discomfort.

Furthermore, the mower's fuel-efficient engine not only saves on operating costs but also minimizes environmental impact, aligning with the growing demand for eco-friendly landscaping practices.

In summary, the Hustler Turf M-1 is a powerful, efficient, and versatile mower that meets the demands of professional lawn care. Its combination of innovative features, advanced technology, and superior design make it an exceptional investment for those in the landscaping industry. Whether tackling commercial properties or large residential lawns, the M-1 stands out as a reliable and effective choice for serious lawn care professionals.
Top Page Image Contents