FRONT OF TRACTOR FACES THIS DIRECTION

 

 

 

 

mmz_steering.eps

N

 

 

 

N

FORWARD TRAVEL

ZERO DEGREE

FORWARD TRAVEL

REVERSE TRAVEL

REVERSE TRAVEL

 

TURN

RIGHT TURN

RIGHT TURN

 

N= NEUTRAL POSITION

Direction of arrows indicate direction of tractor movement

Figure 3-8

For emergency stop, when traveling forward or rearward, place the steering control levers in the park brake position immediately.

DANGER: When moving in the rearward direction push forward gently on steering control levers and avoid sudden movement. Any sudden movement could cause the front of the mower to come off of the ground resulting in possible loss of control, causing serious injury or death.

To make a three point turn to the right, move the left control lever farther forward from neutral than the right control lever and start the turn. Next, pull back on the control levers until they are past neutral and the machine starts to go rearward. Pull right control lever farther rearward from neutral than the left control lever until the rear of the machine has pivoted around. Then, push the control levers forward until they are both past neutral and the machine starts to go forward. Push the left control lever farther forward from neutral than the right control lever and finish the turn. (Figure 3-9)

IMPORTANT: Rapid movement of control levers is not rec- ommended as damage to the hydraulic system components may occur.

To increase speed, increase control lever’s distance from neutral. The farther forward control levers are from neutral, the faster tractor will travel forward. The farther back control levers are from neutral, the faster tractor will go in reverse.

Tractor towing

The tractor has a maximum towing capacity of 500 pounds. This includes the trailer weight and the payload.

The trailer tongue is limited to a maximum of 50 pounds. No other applications are approved.

Operating suggestions

DANGER: Prior to operating the tractor the operator should be thoroughly familiar with the proper use and operation of the equipment, should read the manual completely and thoroughly, and should have attempted slow moving maneuvers to become familiar with the operation of the equipment before attempting normal speed operation. An inexperienced operator should not mow on slopes or on uneven terrain.

WARNING: If you lose steering control while oper- ating the machine, place the steering control levers in the park brake position immediately. Inspect the machine and involve your Hustler dealer to resolve the problem before continuing to operate.

WARNING: The unit’s steering control levers are

very responsive: Easy does it! For smooth operation, move lever slowly, avoid sudden movement. Skill and ease of operation come with practice and experience. The machine can spin very rapidly. Use caution when making turns and slow down before making sharp turns.

Inexperienced operators may have a tendency to oversteer and

lose control. Slow-moving practice maneuvers are recommended to become familiar with these characteristics before attempting normal speed operation.

WARNING: Sharp depressions or raised obstacles (such as gutters or curbs) should not be directly approached at high speed in an attempt to “jump” them as the operator could be thrown from the equip- ment. Approach at a slow speed and angle one drive wheel at the obstruction. Continue at an angle until the wheel clears and then pivot the opposite wheel around.

When turning on soft wet turf, keep both wheels rolling either

602223_0609

3-7

Page 20
Image 20
Hustler Turf Z4 manual Front of Tractor Faces this Direction, Tractor towing, Operating suggestions

Z4 specifications

The Hustler Turf Z4 is an exceptional zero-turn mower designed for both commercial landscapers and residential users seeking high performance and efficiency. Known for its robust construction and outstanding maneuverability, the Z4 stands out in the competitive field of lawn care equipment.

One of the key features of the Hustler Turf Z4 is its powerful engine options. Equipped with a choice of Kawasaki or Kohler engines, the Z4 delivers reliable performance and impressive torque, ensuring that it can handle tough mowing conditions with ease. The engine options range from 19.5 to 25 horsepower, providing ample power for various lawn sizes and terrain types.

The Z4 features a cutting width of 42 to 54 inches, allowing users to cover large areas in less time. Its innovative cutting deck design promotes superior grass clipping dispersion, leaving behind a clean and even finish. The deck is reinforced for added durability, making it capable of withstanding the rigors of frequent use, whether in commercial landscapes or home lawns.

One of the standout technologies in the Hustler Turf Z4 is the patented SmoothTrak steering system, which allows for precise control and effortless turns. This feature enhances maneuverability around obstacles, flower beds, and tight corners, making mowing a more efficient task. Combined with its low center of gravity, the Z4 offers stability on hills and uneven surfaces.

The Hustler Turf Z4 also prioritizes user comfort and ease of operation. The ergonomic seat design supports long hours of mowing without discomfort, and the intuitive control layout ensures that even novice users can operate the mower with confidence. The easy-to-adjust cutting height allows for quick transitions between different grass types or blooming flowers.

Additionally, the Z4 is equipped with convenient maintenance features. The flip-up deck allows for easy access to the blades for cleaning and sharpening, while the integrated grease fittings simplify lubrication.

In conclusion, the Hustler Turf Z4 is a powerful and versatile zero-turn mower that combines advanced technology with user-friendly features. Designed for performance and durability, it caters to the needs of both professionals and homeowners who demand efficiency and quality in their lawn care equipment. Whether tackling expansive lawns or intricate landscaping, the Z4 rises to the occasion with style and precision.