in “Custom” mode. These procedures are the same as for modifying configuration parameters and running diagnostic tests after the initial installation, as described in Section 4, “Operation”.
Windows Installation
To install the adapter using Windows:
1.Start Windows.
2.Insert the SPT software diskette into the PC diskette drive.
3.From the Program Manager, select the File menu.
(For Windows 95, select the Start menu)
4.Select Run...
5.Type A:\SETUP and select OK.
6.Follow the Wizard utility’s
DOS Installation
To run the Wizard utility:
1.Insert the diskette into the PC diskette drive and type A:\INSTALL at the DOS prompt. The main installation screen appears.
2.Press OK to confirm the specified destination directory.
After the files are copied, the Network Speed screen appears.
Setting the Network Speed
Token Ring networks operate at a speed of either 16 Mbps or 4 Mbps. To modify the speed:
1.Click on the pull down list to select the required speed.
2.Press OK to save the parameters. The Hardware Setup screen appears.
