Hyundai H-1411 instruction manual MP3 operation, Program mode

Program mode

∙Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP/STEREO (ON/OFF) button.

∙Press the MEMORY/REPEAT/PROG button, the track number will flash on the display.

∙Select a desired track by using the BACK/TUNE DOWN AND NEXT/TUNE UP buttons.

∙Press the MEMORY/REPEAT/PROG button to confirm.

∙Repeat steps described above to enter additional memories into the program if necessary.

∙After a maximum of 20 songs (or less) have been selected as described above, press the MEMORY/REPEAT/PROG button.

∙The display will now show the exact song sequence in memory by displaying all the song numbers rapidly.

∙Also, the program led-light will remain "on" to indicate that you have saved a program-memory (sequence).

∙When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.

∙To stop the CD, press the STOP/STEREO (ON/OFF) button.

NOTE: The program memory will be cleared when you press STOP/STEREO (ON/OFF) button twice or turn off the CD or power supply.

∙To remove the CD from the unit open the CD door.

∙To turn off the CD player set FUNCTION switch to TAPE position.

MP3 operation

∙Set FUNCTION switch to CD (MP3) position.

∙Open the CD door. Put a MP3 disk into the CD compartment and close the CD door.

∙The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the display will indicate the current track no: (001).

∙At any time during playback, press and release BACK/TUNE DOWN AND NEXT/TUNE UP buttons to skip backwards or forwards by one track.

∙MP3 discs often have ￿folder￿ (sub-directories) which contain groups of songs.

∙If your MP3-CD has no folders, you can use the "skip +10/folder" button to jump 10 songs ahead. This is useful if you have many songs on you want to quickly jump to a particular song.

∙Press "skip +10/folder" several times until you reach a song number near to your desired song, and then press "back" or "next" repeatedly to arrive and the exact song you desire.

(note: the "skip +10" function only works on MP3-discs which have no folders).

∙If your MP3-CD has folders, you can select the folder to playback by pressing the button.

∙Each time you press the "skip +10/folder" button, the player jumps to the first song in the next folder.

(note: the "folder" function only works on MP3-discs which have folders. If your disc has no folders, pressing will perform the "skip +10" function).

Note: Good quality sound is guaranteed only when playing licensed MP3 discs.

7