Troubleshooting guide
General | Car's engine switch is not on. Turn your car's key to ACC or ON. | |
No power or no sound | Cable is not correctly connected. Check connection. | |
| Fuse is burnt. Replace fuse. Check volume or mute on / off. | |
| If above solutions cannot help, press the RESET button. | |
Disc | Disc is upside down. Place disc in the correct direction, and the label side up. | |
Disc is inside but no | Disc is dirty or damaged. Clean disc or change another disc. | |
sound |
|
|
Disc sound skips, tone | Disc is dirty or damaged. | |
quality is low | Clean CD or change another CD. | |
Sound skips due to | Mounting angle is over 30º. Adjust mounting angle to less than 30º. | |
vibration | Instable mounting. Mount the unit securely with the mounting parts. | |
|
| |
Radio | Station is too far, or signals are too weak. | |
Much noise in broadcasts | Select other stations of higher signal level. | |
Preset station is reset | Battery cable is not correctly connected. | |
| Connect the battery cable to the terminal that is always live. | |
Error display messages | NO FILE: Disc is not CD or contains no MP3 files. | |
|
| Disc upside down. |
| ||
| ||
| ||
| Press | button to eject the disc. In case that the disc cannot be ejected by pressing button, press the |
| RESET switch and press the button again. If still not ejecting consult your dealer. |
16