Hyundai H-CMD4005 instruction manual Din rear-mount method

Din rear-mount (method 2)

Installation using the screw holes at both sides of the unit.

1.Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions at each side.

Use either truss screws (5 x 5 mm), depending on the shape of the screw holes in the bracket.

2.Screw.

3.Factory radio mounting bracket.

4.Dashboard or Console.

5.Hook (Remove this parts).

Note: The mounting box, outer trim ring

and the half-sleeve are not used for this method of installation.

5