Hyundai H-CMD4015 instruction manual Dual zone, Last Position Memory, Ejecting/Loading

Dual zone

Pressing and holding SMART/MODE button on the RC, you can turn on or off the dual zone playing mode. After turning on dual zone playing mode, press SMART/MODE button to select the playback mode for rear zone: MEDIA => TV => AV1 => AV2.

Last Position Memory

During the media playback (DISC, USB, SD/MMC CARD), if you turn off the unit and then switch on it, the unit will resume playing from the point that it was interrupted.

During the media playback (DISC, USB, SD/MMC CARD), if you switch to other mode, and then return the previous mode again, the unit will resume playing from the point that it was interrupted.

Ejecting/Loading

Note: Before removing a disc from the disc slot, you should retract the TFT screen, otherwise, the loaded disc can not be removed from the disc slot when you press the EJECT button.

Press EJECT button to flip down the panel, now you can load the disc.

Press EJECT button to flip down the panel. Press it one more time to eject the disc.

To adjust the angle of TFT Screen

Poke at the TFT screen to adjust the gradient of the TFT screen, so as to achieve an optimal viewing angle.

18