Hyundai H-CMD7086 instruction manual AF/MONO button, Auto memory store, Preset scan

-Hold a preset button (1-6), which you want store the station for at least 2 seconds.

￿￿To recall a station:

-Select a band (if needed)

-Press a preset button (1-6) briefly to recall the stored station.

AF/MONO button

Press AF/MONO button to enable AF mode. Press and hold AF/MONO on the unit or press ST/MO on the RC to choose MONO or STEREO.

Auto memory store

Select a band. Press AS/PS button on the panel or P.SCN/RPT button on the RC and hold for 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press this button again.

Preset scan

Select a band. Press AS/PS button on the panel or P.SCN/RPT button on the RC to scan all preset stations in the memories of the current band. To stop preset scan, press the button again.

TA (Traffic Announcement) function

1.Press TA/DSP button shortly to turn on or turn off the TA function. When the TA function, TA icon will be displayed.

2.When TA or TP RDS signal is available from the current station, TP icon is turned on. When TA/TP is enabled (on), but no traffic announcement is transmitted, TP icon is off and TA icon keeps blinking.

AF (Alternative Frequencies) function

Press AF/MONO button on the panel shortly to turn on or turn off the AF function. If the AF function is on the display will show “AF”. When AF switching mode is selected, but RDS information is not received yet the “AF” will be flashing.

19