Connect to the amplifier with digital signal input terminal
Connecting diagram
Terminal board for the player
With digital signal input terminal’s |
|
DTS, Dolby Digital signal decode |
|
amplifier terminal board | With digital signal input terminal’s DTS, |
| Dolby Digital signal decode amplifier |
Connection precautions
Use optical fibre, coaxial signal wire to connect optical fibre, coaxial output jack of the unit with optical fibre, coaxial input jack of other amplifier, then you can feel the super digital sound effect (can’t use two output mode at the same time, if you connect the optical fibre and coaxial with the signal wire at the same time, the unit is for coaxial output only.).
Caution: Optical fibre output terminal is for use the system with optical fibre output function only.
Connecting the AC Power Cord
Insert the AC power cord into a wall outlet, and your system is at your command!
Caution: Be sure to unplug the power cord from the outlet when going out or the system is not in use for an extended period of time.
Connect the Headphone
Connect a pair of headphones to the phone jacks. No sound comes out of the speakers. Note: Be sure to turn down the volume before connecting or putting on headphones.
- 8 -
