11
Position: you can set the program number to switch to at the desired time.
System
1. Press the MENU button twice to select the INSTALL menu.
2. Press the PROG+/- buttons or GREEN/BLUE buttons to select the setting: COLOR-SYS, SOUND-SYS, POSITION 1,
POSITION 2, EXCHANGE, COPY, CLEAR ALL.
3. Press the VOL+/- buttons or RED/YELLOW buttons to adjust the setting selected.
4. Press the MENU button to confirm the setting and return to the previous menu window.
Color system: you can select the color system: AUTO, PAL, NTSC, SECAM.
Sound system: you can select the sound system: 6.0M (PAL I), 6.5M (PAL D/K), 4.5M (NTSC M) and 5.5M (PAL
B/G), PAL B/G, SECAM B/G, PAL I/II, PAL D/K, SECAM D/K, NTSC-M.
Positions 1: press VOL+/- to select Position 1.
Positions 2: press VOL+/- to select Position 2.
Exchange: press VOL+/- to exchange Position 1 and Position 2.
Copy: press the VOL.+/- buttons to copy Position 1 to Position 2.
Clear all: press VOL+/- button on the panel at the same time for 2 seconds then enter the function of Clear all to clear all programs. The bar of menu is
flickering at the meantime.
Preset menu
Position
Up to 256 TV channels can be stored by program numbers (0 to 255). By pressing VOL.+/- Buttons (or number keys) you
can to select channel number. You can store the channel number, which are watching, and change the channel number.
Once you have preset the channels, you will be able to use the PROG. +/- or NUMBER buttons to scan the channels you
have programmed.
Memory: You can set "OFF" by pressing VOL.+/- Buttons if you want to cancel the channel number of which you are
watching.
Band: You can select V-L, V-H or UHF bands by pressing VOL.+/- Buttons.
Fine: You can use this FINE tuning process for fine adjustment by pressing VOL.+/- Buttons. Normally fine tuning is only
necessary if reception is poor.
Search :Press VOL.+/- Buttons to start searching. The VOL- button for backward search; the VOL+ button for forward search. When a TV station signal is
received, the searching will stop automatically.
Auto Search: Press VOL.+/- Buttons, the TV set will automatically search from V-L band to U band.
Selecting Program
Use 0-9 digit buttons to call directly on the program number that you want. If you want to select a double digits program number, firstly press "- / - -"
button, then input the two digits. You can also move channel by pressing Program UP/DOWN buttons.