NVP1015 / NVP1017 | User Manual |
2. Read Before Installation
Technical Notes
For Windows 98/98 SE systems
•HID (Human Interface Device) driver must be installed prior to using the USB KVM switch. To install the HID driver, first connect a USB keyboard and mice directly to computer (before installing KVM switch) then follow the Windows installation instructions, this will install the HID device driver and allow the use of the KVM switch.
Note : Failure to do so may result in Windows not being able to detect keyboard and mouse.
•If a mouse recognition error is displayed during system boot:
“Windows did not detect a mouse attached to the computer.You can safely attach a serial mouse now. To attach a mouse to a PS/2 mouse port, you must first turn the computer off”
a)Press the Tab key once to select the check box.
b)Press the Space bar once which will place a check in the box “Do not show this message again”
c)Press the Enter key once and Windows will continue to boot and will then recognize the mouse.
Operating System Compatibility
•Any
•Windows® 95 are not recommended because of immature USB support.
2