i. Tech Dynamic Arrow Lite specifications Safety Information, RF exposure warning

Rejecting a Call (Handsfree Profile ONLY)

Press and hold the Volume Key then press the MFB key to reject the incoming call. Transferring a Call (Handsfree Profile ONLY)

Press and hold the Volume Key then press the MFB key to transfer the call from headset to your mobile handset.

Resetting or Removing Pairing

You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings.

1.Insert the charger plug into the headset’s charging socket

2.Press and hold either of the volume keys for 20 seconds until the status indicator flashes orange rapidly.

3.Release the volume key.

4.Press and hold the volume key again until the status indicator is orange.

5.The headset is reset and will resume the charging mode.

Note: After resetting, all previous pairing settings are cleared.

Care and Maintenance

Headset

•Turn off your headset before placing it in your pocket or bag. If the MFB is

accidentally depressed, your mobile phone may place an unintended call. 9

•Do not expose the headset to liquid, moisture or humidity as it is not waterproof.

•Do not use abrasive cleaners to clean the headset.

•Do not expose the headset to extremely high or low temperatures.

•Do not leave your headset under the hot sun for a long time.

•Do not leave your headset near open flames such as cooking burners.

•Do not dispose of the headset in a fire as it will result in explosion.

•Do not bring your headset into contact with any sharp objects as this will cause scratches and damage.

•Do not stick anything inside the headset as this may damage internal components.

•Do not attempt to disassemble the headset as it does not contain serviceable components.

•Do not pull or drag the earphone-wire with force.

•If you will not use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust.

Built-in Battery

•Do not attempt to replace the headset’s battery as it is in-built and is not changeable.

•Charge the battery in accordance with the instructions supplied with this user guide.

•Use only the charger supplied by the headset’s original manufacturer to charge the battery.

Charger

•Use only the charger supplied by the headset’s original manufacturer to charge the

headset. Other chargers may look the same, but they could be dangerous. 10

•Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used.

•Do not use the charger outdoors or in damp areas.

•Only charge the headset’s built-in battery in accordance with the instructions described in this user guide.

•Avoid charging the headset in extremely high or low temperatures.

Safety Information

•Check and observe local laws regarding the use of a mobile phone and headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call.

•Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys.

•Never allow children to play with the headset – small parts may be of choking hazard.

•Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.

11

•Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft.

•To prevent damage to your hearing, please do not set the listening volume too high.

•Never use the headset while taking a bath.

•Do not use the headset in a sauna or steam room.

•Do not keep your headset near a wash basin or other wet places.

•Do not use the headset outdoors in the rain.

•Do not clean the headset while it is being charged. Always unplug the charger first before cleaning the headset.

•Do not attempt to modify the headset for other purpose.

•Do not attempt to force open or mutilate the built-in battery.

•Replace the earphone when it shows signs of breaking from the wire.

•Disposal of the packaging and the headset should be done in accordance with the local regulations.

RF exposure warning:

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.

12