Adjusting the Volume
Press the Volume Key repeatedly until you reach the desired volume level.
1 1
2
2
Resetting / Removing the Pairing
You may want to reset the headset to its original settings. This also clears all current pairings.
1.Ensure the headset is OFF.
2.Press and hold one of the Volume Key’s until the status indicator alternately flashes blue and red rapidly.
3.Release the Volume Key.
4.Press and hold one of the Volume Key’s again until you hear 2 beeps.
5.Recharge the headset for a few seconds.
The headset is turned off and returns to the original settings. All
10current pairings are cleared.
Pairing Your Headset
1.Place the headset and the mobile handset where they are easily viewable and no more than 1 metre apart.
2.Ensure the headset is OFF. (No flashing on the Status Indicator).
3.Press and hold the MFB (Fig. 1) until the headset status indicator alternately flashes blue and red.
4.Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
5.Set the mobile handset to search for Bluetooth devices within 1 metre as instructed in the mobile handset user guide and select “i.Tech Arrow II” from the list.
6.Enter the
7.Go back to your mobile handset’s main menu. For certain mobile handset models, a headset icon will be shown on the screen. You should now be able to make and receive calls using your headset.
IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the headset status indicator flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to pair the headset and the mobile handset again.
7
