FLUSHING PROCEDURE

Follow the pressures relief procedure on page 3.

1.Remove and clean gun filter.

2.Unscrew filter housing retainer (ref# 1) (should be hand tight) and remove and clean filter (ref# 5) thoroughly.

3.Re-install the filter housing and retainer. Flush sprayer without filter screen installed.

4.Close prime valve.

5.Pour a gallon of the correct thinner into a clean 5 gallon pail.

6.Insert the intake tube into the pail.

7.Turn regulator control knob all the way counter-clockwise.

8.Point prime valve bleed tube into 5 gallon pail. Turn the pump ball valve on and slowly increase the pressure until sprayer starts. Open prime valve. Allow thinner to circulate

back into the pail for a short period to flush the prime valve.

9.Close the prime valve.

10.While firmly holding a metal part of the gun against a metal waste container, trigger the gun into a separate waste container. Keep the gun triggered until clean solvent is sprayed from the gun. Release the trigger and engage the safety lock.

11.Remove the intake tube from the pail. Trigger the gun once again to discharge thinner from the hose. Do not let the pump run dry for more than a couple of minutes or damage to the pump packing could result.

12.Unscrew filter housing retainer and re-install the filter screen.

13.Repeat steps 3-9 with clean solvent.

14.Turn the ball valve off, and open the prime valve.

NOTE: Filter housing retainer (ref# 1) only has to be hand tight.

NOTE: NEVER LEAVE THE UNIT UNDER PRESSURE WHEN NOT SPRAYING ( MOTOR TURNED OFF ). RELIEVE PRESSURE BY TRIGGERING GUN.

NOTE: TO PREVENT CORROSION AND TO REDUCE THE RISK OF FLUID FREEZING IN THE PUMP.

NEVER STORE THE UNIT WITH PAINT OR

WATER IN THE PUMP SYSTEM, EVEN

OVERNIGHT!

1

5

HRO-ST3131

Page 11

Mar 8, 2004

Page 11
Image 11
I.C.T.C. Holdings Corporation HRO-ST3131 operating instructions Flushing Procedure

HRO-ST3131 specifications

I.C.T.C. Holdings Corporation's HRO-ST3131 is a state-of-the-art solution designed for organizations looking to streamline their operational processes through advanced technology. This innovative system integrates cutting-edge features and technologies that cater to a wide array of industries, enhancing efficiency and productivity.

One of the standout characteristics of the HRO-ST3131 is its user-friendly interface, which facilitates easy navigation and operation. Designed with stakeholders of all technical backgrounds in mind, the system reduces the learning curve for new users, allowing for quicker onboarding and adaptation within organizations. This feature is particularly beneficial for companies that value agility and responsiveness in a rapidly changing business environment.

The HRO-ST3131 incorporates robust data management and analytics capabilities, empowering users to make informed decisions based on real-time data. By utilizing advanced algorithms and machine learning techniques, organizations can gain valuable insights into their operational performance, identify trends, and forecast future needs. This data-centric approach allows for more strategic planning and can significantly enhance overall business outcomes.

In terms of connectivity, the HRO-ST3131 supports a variety of communication protocols, which ensures seamless integration with existing systems and software platforms. This versatility is crucial for organizations that rely on multiple technologies to function effectively. The system also features cloud integration, which facilitates easy access to data from anywhere, thereby fostering collaboration and flexibility among teams.

Security is another key feature of the HRO-ST3131. With built-in encryption and access control mechanisms, the system ensures that sensitive information is protected from unauthorized access and breaches. As data privacy becomes increasingly important for businesses, the HRO-ST3131 addresses these concerns with a comprehensive security framework.

Finally, the HRO-ST3131 is designed for scalability, allowing organizations to expand their operations without overhauling their existing infrastructure. Whether a company is experiencing rapid growth or simply needs to adapt to changing market conditions, the HRO-ST3131 offers the flexibility and functionality needed to succeed. Overall, I.C.T.C. Holdings Corporation's HRO-ST3131 stands out as a forward-thinking solution that not only meets current demand but is also poised to support future advancements in organizational technology.