EQUIPMENT PRESSURE

The HRO ST-3131 pump can develop 3500 P.S.I. (225 Bar) maximum working pressure at Never exceed this maximum pressure to the pump. Exceeding the maximum working pressure can result in serious equipment damage or rupture.

FIRE OR EXPLOSION WARNING

The flow of fluid through the inside of pump and hose can give occasion to static electricity by the high velocity, so be sure to ground every part of the spray equipment properly. Sparking can ignite fumes from solvents and fluid being sprayed, dust particles and other flammable substances, whether you are spraying indoors or outdoors, It can result in serious bodily injury or property damage.

Never plug in or unplug any power supply cords in the spray area where there is any chance of igniting fumes still in the air.

If you experience any static sparking or even a slight shock while using this equipment, stop spraying immediately and check the entire system for the grounding situation.

Do not use again until the problems have been identified and corrected.

PRESSURE RELIEF PROCEDURE

Always follow “PRESSURE RELIEF PROCEDURE’’ before servicing, cleaning or removal of the spray tip to prevent serious bodily injury, fluid injection, or splashing in the eyes.

1Engage the spray guns safety latch in “LOCK” position

2Shut off the power to the gas engine.

3Disengage the spray gun safety latch and aim the spray gun into the side of grounded metal pail, and trigger the

gun to relieve pressure.

1Re engage the spray gun safety latch in “LOCK” position.

2Open the drain valve to release pressure. Leave drain valve in open position during all service operations.

3Leave drain valve open until you are ready to spray again.

If you feel that the spray tip or hose is completely clogged or pressure has not been fully relieved after following the steps above, remove the tip retaining nut and release pressure gradually.

HOSE SAFETY

Because of the high pressure in the hoses, if the hose develops a leak, rupture, or other damage, High pressure fluid could penetrate the skin, causing serious bodily injury.

EQUIPMENT ALTERATION WARNING

Never alter any part of spray equipment or other accessories. Altered or modified. such as over-pressurizing, modifying parts, using incompatible chemicals and fluids including worn or damaged parts can result in malfunction causing serious bodily injury, fire, explosion or property damage. Always check all spray equipment regularly and repair or replace worn or damaged parts without delay.

Workman and assistant must always wear protective eyewear, gloves, clothing, and respirator as recommended by the material manufacturer.

Never use damaged hoses. Before using check the en- tire hose for cuts, leaks, abrasion, or a bulging cover. If any type of damage is noticed, replace the hose immedi- ately.

Spring guard : Hoses must have spring guard on both ends where easy to damage or wear than other parts. Tighten all fluid connections securely before use. High pressure fluid can dislodge a loose coupling.

Do not pull on hoses to move, only lift the hoses up to move them.

Do not exceed the hoses to temperatures above 180 de-

grees F. (82 degrees C.) or below –40 degrees F.

(-40

degrees C.)

 

Before using be sure to check a tag on it which

speci-

fies the maximum electrical resistance and

do not

exceed the recommended limits.

 

Ungrounded or poorly grounded hose can give way to serious system hazards or fire/explosion hazard.

HRO-ST3131

Page 5

Mar 8, 2004

Page 5
Image 5
I.C.T.C. Holdings Corporation HRO-ST3131 Equipment Pressure, Fire or Explosion Warning, Pressure Relief Procedure

HRO-ST3131 specifications

I.C.T.C. Holdings Corporation's HRO-ST3131 is a state-of-the-art solution designed for organizations looking to streamline their operational processes through advanced technology. This innovative system integrates cutting-edge features and technologies that cater to a wide array of industries, enhancing efficiency and productivity.

One of the standout characteristics of the HRO-ST3131 is its user-friendly interface, which facilitates easy navigation and operation. Designed with stakeholders of all technical backgrounds in mind, the system reduces the learning curve for new users, allowing for quicker onboarding and adaptation within organizations. This feature is particularly beneficial for companies that value agility and responsiveness in a rapidly changing business environment.

The HRO-ST3131 incorporates robust data management and analytics capabilities, empowering users to make informed decisions based on real-time data. By utilizing advanced algorithms and machine learning techniques, organizations can gain valuable insights into their operational performance, identify trends, and forecast future needs. This data-centric approach allows for more strategic planning and can significantly enhance overall business outcomes.

In terms of connectivity, the HRO-ST3131 supports a variety of communication protocols, which ensures seamless integration with existing systems and software platforms. This versatility is crucial for organizations that rely on multiple technologies to function effectively. The system also features cloud integration, which facilitates easy access to data from anywhere, thereby fostering collaboration and flexibility among teams.

Security is another key feature of the HRO-ST3131. With built-in encryption and access control mechanisms, the system ensures that sensitive information is protected from unauthorized access and breaches. As data privacy becomes increasingly important for businesses, the HRO-ST3131 addresses these concerns with a comprehensive security framework.

Finally, the HRO-ST3131 is designed for scalability, allowing organizations to expand their operations without overhauling their existing infrastructure. Whether a company is experiencing rapid growth or simply needs to adapt to changing market conditions, the HRO-ST3131 offers the flexibility and functionality needed to succeed. Overall, I.C.T.C. Holdings Corporation's HRO-ST3131 stands out as a forward-thinking solution that not only meets current demand but is also poised to support future advancements in organizational technology.