USB LED Pattern | Error Type |
Flash slowly | Firmware reload required |
Steady on | DRAM error |
1 long - 2 short | Timer INT error |
1 long - 3 short | Flash protected |
1 long - 5 short | Flash erase/program error |
1 long - 6 short | LAN controller error |
1 long - 7 short | LAN memory error |
1 long - 11 short | LAN I/O base error |
1 long - 18 short | USB controller error |
In the event of a ‘Firmware Reload Required’ error at startup, proceed according to instructions given in the PS Admin User’s Guide ("PS Admin Administration" section, under the heading "Upgrading the Print Server's Internal Firmware").
In the event that any of the other listed error conditions is encountered on startup, contact your dealer for correction of the fault.
- 13 -
