IBM 1-Port USB Print Server manual Rear View, Input

Rear View

LAN

Power

Reset Button

Component		Description
DC	Power	The DC power input connector is located on the
Input		Print Server’s rear panel and is labeled DC 5V.
		Please note that the power supply included in the
		package is correct for this 1-Port USB Print Server;
		substitution of other equipment may void
		warranty.
Reset Button		1.) Press and release this button to reset the print
		server.
		2.) Press and hold this button for three seconds
		(the USB LED on the front panel lights up)
		and then release it, the print server will
		resume the factory default settings.
LAN		This LAN connector (RJ -45) provides the printer
Connector		server with connection to the network through
		10/100 TX Ethernet cabling.

This printer port is configurable by commands in the PS Admin program, or by commands issued to the print server via Telnet. See the PS Admin User’s Guide for configuration procedures. The print server also supports web configuration, which allows users to configure settings through the web browser. The print server’s default IP address settings are:

♦Default IP address – 192.168.0.1

-9 -