Connecting to a PCIf you have a brand-new computer, before connecting the printer,
you should follow the manufacturer’s instructions for setting up t he
computer, including (if it’s not already installed) any operating
system software, such as DOS and Windows.
What You Need
To connect your printer to a single PC, you need one of the
following interface cables (not included with your printer, but
available at any computer store):
■a parallel cable (with 36-pin and 25-pin male connectors)
■or a serial cable (with a 25-pin male and a 9- or 25-pin
female connector, depending on the computer’s serial
port)
If you’re replacing a printer, you probably already have the
necessary cables.
How to Choose a Cable
We recommend using a parallel cable if possible, because parallel
communication doesn’t require printer configuration, while serial
communication often does. However, if the printer is more than 6
feet (1.8 meters) from the computer, we recommend using a serial
cable for better communication.
NOTE: Interface cables should be no longer than 6 feet (1.8
meters) for parallel or 25 feet (7.6 meters) for serial
communication.
Chapter 3
3-10 Connecting the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500