Chapter 2. Using the Multi-Burner drive
This section provides information on how to handle, load, and care for DVDs
and CDs and how to care for your Multi-Burner drive.

Before you begin

For best results, review the following guidelines before using the drive:
vDo not move your ThinkPad computer while formatting or writing a disc as
this might cause data errors. Also, minimize typing while formatting or
writing to a disc, as this might also cause data errors.
vKeep the ThinkPad computer on a flat surface when writing to a disc.
vMake sure the ThinkPad computer is plugged into an ac outlet when using
the drive. The disc might be damaged if the battery runs out while writing
to a disc.
vTurn screensavers off.Using a screensaver might interrupt the formatting
and writing process.
vDo not put your ThinkPad computer into hibernation or suspend mode
while writing to a disc.
Note: The read and write results of the drive depend upon the quality and
characteristics of the DVD or CD media used.

Handling and caring for a disc

Carefully handle and clean discs, especially writable media types such as CD-R
and CD-RW discs, so that they remain readable. Youcan prolong the life of
your discs by using the following precautions:
vAlways store CD ROMs in their original packaging
vAlways store CD ROMs out of direct sunlight
vAlways store CD ROMs away from direct heat sources
vRemove CD ROMs from the computer when not in use
vCheck CD ROM for cracks BEFORE each use
vDO NOT force CD ROMs into the computer/packaging
vDO NOT bend or flex CD ROMs
IMPORTANT:DO NOT use CD-ROMs that are cracked.
Attention: Wiping a disc using a circular motion can cause data loss.
© Copyright IBM Corp. 2003 7